• Horizontal surface-mounted baby changing station made of bacterial-resistant polypropylene and with AISI 304 stainless steel exterior.

BabyMedi® changing stations offer a very high level of safety and cleanliness being the ideal solution for public spaces such as, shopping centers, airports, public buildings, childcare centres, etc. Models suitable for high traffic facilities with high strength and durability.

• Their trendy and stylish design, allow these baby changing stations to blend into any space perfectly.

• Biocote® antimicrobial additive, based on ion silver technology, is embedded into its own surface, promoting an easy cleaning and reducing the growth of odor causing and staining microbes.

• BabyMedi® baby changing stations are supplied (inside the packing box) with child protection straps made of nylon.

• A pair of bag hooks (one at the right side and the other one at the left) help to keep personal belongings close and at hand.

• BabyMedi® units fully comply with the EN 12221-1 and EN 12221-2 standards that require baby changing stations be able to support a 50 Kg static load test during one hour. Moreover, units tested in our own laboratories have withstood loads over 100 kg.

Ø 40 x 80 mm

• Reserve-toilet roll holder in solid, germ-reducing and easy-care stainless steel (AISI 303), satin finished.
  Further available surfaces: see below. 
• Designed for one standard toilet roll with dimensions:
  Outer diameter max. 125 mm
  Width max. 100 mm
  Core diameter min. 38 mm
• Concealed, centric, anti-theft wall disc mounting.
• Holder diameter 16 mm, length 80 mm.
• Mounting with one screw.
• Delivery includes fixing material.

• Weight (in kg): 0,20

71 x 230 x 121 mm

• Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• For mounting behind fixed mirror on site.
• One-hand operation disinfectant pump with 950 ml tank. 
• Tank with large, lockable refill opening.
• Designed for standard disinfectants. Accessible for refilling through spring stop pin and by removing from below. 
• Note: Not approved for medical areas.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall.
  Depth of substructure installation: min. 160 mm
  Height above vanity unit: min. 280 mm
• Delivery includes fixing material and self-adhesive information label „Disinfectant“.

• Weight (in kg): 0,7

DOMEKT REGO 400 VE/VW (R 400 V) filtrikomplekt (analog)