Delabie Be-line lift-up dušiiste eemaldatav alumiinium antratsiit
Kaubamärk:

Ühik: tk
Tarneaeg: 14-21 päeva
Müüja: PEGU OÜ
Olete leidnud õige toote – nüüd on aeg see enda omaks teha.
- ✔ Kvaliteetne toode kiiresti ja mugavalt kätte
- ✔ Turvaline ja läbipaistev ostuprotsess
- ✔ Meie meeskond hoolitseb iga detaili eest
Lisage toode ostukorvi ja jätkake tellimusega – nii on ta varsti juba teie juures!
PEGU.ee – targad valikud inimestele, kes hindavad stiili ja kvaliteeti.
Be-line lift-up shower seat
Ref. 511920C
Be-line removable lift-up shower seat for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
Non-slip surface.
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
Solid aluminium mounting bracket.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 455 x 450 x 90mm.
Folded dimensions: 85 x 470mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Failid
Technical features
Be-line lift-up shower seat
Ref. 511920C
Height | 90mm |
---|---|
Depth | 455mm |
Width | 450mm |
Finish | Metallised anthracite powder-coated aluminium |
satiin R/V teras
150,47 €
satiin R/V teras
176,90 €
Be-Line® anthracite straight grab bar Ø 35mm, L. 900mm
Ref. 511909C
Be-Line® grab bar Ø 35mm, for people with reduced mobility.
For use as a handrail or grab bar for WCs, showers or baths.
Aluminium tube, 3mm thick. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated finish provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall:minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
900mm centre-to-centre.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Technical features
Be-Line® anthracite straight grab bar Ø 35mm, L. 900mm
Ref. 511909C
Length | 900mm |
---|---|
Width to the wall | 38mm |
Thickness | 3mm |
Finish | Metallised anthracite powder-coated aluminium |
183,00 €
Be-line® L-shaped grab bar, white, H. 750mm
Ref. 511970W
Be-line® L-shaped grab bar for showers or baths.
Helps the user stand and move safely in the shower or bath.
Use as a shower rail by adding a shower head holder and/or soap dish.
Can be installed with upright bar on the left or right.
Aluminium tube thickness 3mm. Solid aluminium fixing points.
Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
Matte white powder-coated aluminium provides a good visual contrast with the wall.
Uniform surface for easy maintenance and hygiene.
38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
Concealed fixings.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 750 x 450mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
TECHNICAL FEATURES
Be-line® L-shaped grab bar, white, H. 750mm
Ref. 511970W
Height | 750mm |
---|---|
Length | 450mm |
Width to the wall | 38mm |
Thickness | 3mm |
Finish | Matte white epoxy coated aluminium |
315,00 €
Normbau Verso Care lift-up dušiiste põranda jalaga, 412 x 446mm
Verso Care lift-up shower seat with floor support, 412 x 446mm
Verso Care Shower seat with floor support,
412 x 446 x 482 (128)mm
with positively driven floor support, for seat height 470-500mm, wall bracket made of stainless steel, scratch-resistant powder coating, support bracket made of aluminium, scratch-resistant powder coating, Aluminum floor support, scratch-resistant, seat made of thermoplastic polypropylene, ergonomically visible seat with rounded outer edges, available in NORMBAU colors 018 and 019, with adjustable brake, locked in the upright position, easy construction, maximum loading permitted: 150 kgs, tested, respond TÜV requirement (in accordance
with DIN 18040).
The fixing set should be ordered separately to suit the type of wall.
385,00 €