Tootegrupid
jpg_160600_1.jpg Zoom

Delabie KOMPACT Combi WC+valamu vasakul põranda antivandaalne R/V teras AISI304

Tootekood: DE-160600
Kaubamärk:
Ühik: tk
Tarneaeg: 4-6 nädalad
Hind:
3611,20 €
Kuumakse alates: 306,95 €
Kogus: - +
   - või -   

KOMPACT washbasin and floor-standing WC combination 
Ref. 160600

Combination unit: washbasin and floor-standing WC pan on right side with recessed toilet roll holder. 
Wall-mounted installation with 3 access panels, 2 on the sidesand 1 on the top with theft prevention TORX security screws. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel unit thickness: 2mm. 
Rounded corners and edges for improved safety. 
Smooth surface for easy cleaning. 
Suitable for prisons, police stations, etc. 
WC pan is completely welded to washbasin, no screws: 
makes cleaning easier and prevents concealment of objects. 
Washbasin equipped with time flow tap: stainless steel tamperproofpush-button and anti-blocking system, 7 second time flow, M1/2".
WC equipped with time flow flush valve, 7 second time flow, M3/4".
Water inlet: washbasin M1/2", WC M3/4".
Recessed horizontal water outlet: Ø 100mm. 
Supplied with washbasin siphon. 
Easy to install: only one water outlet for both washbasin and WC,water inlet and outlet already connected. 
Weight: 36kg. 
[Formerly ref: 0610030006]

 

TECHNICAL FEATURES 

KOMPACT washbasin and floor-standing WC combination 
Ref. 160600

Height 1000mm
Length 735mm
Width 725mm
Thickness 2mm
Finish 304 polished satin stainless steel

Failid

Sarnased tooted

Overall dimension in mm Ø300 x 382 Inlet dimension in mm 1.5" Outlet dimension in mm 1.5" Material AISI 304 Material thickness in mm 1.5 Gross weight in kg 7.70

Tootekood: EL255-GIPS-01 ,   Tarneaeg: 3-4 nädalad
1135,00 €
WC poti raam loputuskastiga , antivandaalse R/V teras katega
 

BSAZ 5

Wall module construction for WC with vandal-resistant st.steel cover

   
 
 
 

BSAZ 5 is a wall module for wall mounted toilets equipped with anti-vandal stainless steel cover – with resistant stainless safety buttons. The cover is screwed by security bolts therefore it cannot be dismounted without special tools. The system is suitable for spaces where toilet flushing from a cistern is required but where, on the other hand, there is a threat of damaging of usual plastic covers. The robust anti-vandal stainless cover contains stainless control buttons resistant to damage (unlike the usual plastic buttons).

 

The cover of BSAZ 5 is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

 

 

 

 
Version types
BSAZ 5 - Wall module construction for WC with vandal-resistant st.steel cover
 
 
Basic technical information
Dimensions of wall module: (1000–1200) × 510 × (160–200) mm
Dimensions of st.steel cover: 510 × 230 × 30 mm
Water inlet: G 1/2"
Outlet: DN 100
 
 
Requirements for setting up the construction
  1. Space for mounting the wall module
  2. Water inlet G 1/2"
  3. Waste pipe for outlet connection (DN 100)
 
 
Complete delivery
  • wall module with cistern
  • st.steel cover with vandal-proof buttons
 
Tootekood: AZP-BSAZ 5 ,   Tarneaeg: 3-4 nädalad
1055,00 €
Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele,  ilma el.adaptorita
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Tootekood: AZP-AUS 11 ,   Tarneaeg: 3-4 nädalad
375,00 €

Wall-mounted BOB washbasin
Ref. 120130

Wall-mounted washbasin.
Basin internal diameter: 310mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin, concealed trap.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
With no tap hole.
Supplied with 1 ¼" waste and trap.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 5.5kg.

Tootekood: DE-120130 ,   Tarneaeg: 14-21 päeva
603,90 €

CANAL wall-mounted wash trough 
Ref. 120240

Wall-mounted wash trough for 1 post. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets. 
Drainage on the right. 
With no tap hole. 
Supplied with 1 ½" waste. 
Without overflow. 
Supplied with brackets and fixing elements. 
CE marked. Complies with European standard EN 14296. 
Weight: 6kg. 
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800001). 

Tootekood: DE-121240 ,   Tarneaeg: 14-21 päeva
603,90 €
Projektide hinnapäringud ja tooteinfo kättesaadavusega seotud küsimused palume saata e-mailile info@pegu.ee

Ära unusta kasutada ostukorvis kampaaniakoodi 

PEGU-SUVI