Delabie pissuaar L 1800mm antivandaalne R/V teras AISI304
Kaubamärk:

Ühik: tk
Tarneaeg: 4-6 nädalad
Müüja: PEGU OÜ
Olete teinud oma valiku – nüüd jääb vaid nautida ostu!
Tellimuse vormistamine on kiire ja lihtne:
✔ Lisage soovitud tooted ostukorvi.
✔ Täitke andmed – kas eraisikuna või juriidilise isikuna.
✔ Valige sobiv tarneviis.
Pärast ostu kinnitamist saadetakse teile e-kirjaga teavitus ning meie asume tellimust täitma!
PEGU OÜ – neile, kes hindavad stiili, kvaliteeti ja laitmatut teenindust.
L trough urinal
Ref. 130220
Floor-standing recessed trough urinal.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Rear water inlet.
Supplied with 3 stainless steel rinsers and 3 flexible hoses.
Water saving: optimal rinsing with 0.1 L/sec. per service i.e. 0.3L per use.
Waste outlet 11/2". Supplied with waste and integrated trap (ref. 785000).
Weight: 34kg.
TECHNICAL FEATURES
L trough urinal
Ref. 130220
Supply | Rear inlet/recessed |
---|---|
Height | 1020mm |
Length | 300mm |
Width | 1800mm |
Thickness | 1.2mm |
Finish | 304 polished satin stainless steel |
Failid
Pissuaari isesulguv mehhanism
258,00 €
Keraamiline pissuaar Antero radariga Sanela, integreeritud adapter 240V/ AC
SLP 20RZ
Urinal Antero with a radar flushing unit and integrated power supply, 230 V AC
Characteristics
- easy installation
- whole flushing unit is placed behind the urinal
- system reacts only on the direct use of the urinal (it analyses changes, which are proceeded inside of the urinal, when a liquid is flowing through)
- adjustable flushing time 0,5 - 15,5 s
- parameters adjustment by remote control SLD 04 without the necessity to dismantle the urinal from the wall (acoustic setting indication)
- automatic flushing after each 6 hours non-use
- possibility to regulate a water flow by the angle valve
- radar flushing unit recharges a water to the siphon after each flushing
Order number | 01205 |
Code | SLP 20RZ |
Supply specification
Technical information
Recommended flow pressure: 0,1 - 0,6 MPa
Rate of flow: 18 l/min (inf. data)
Water inlet: male thread G 1/2“
Water outlet: inlet fitting with a rubber seal
> Working pressure : 1 to 5 bar
> Volume of water delivered : Adjustable from 6 to 9 litres with stop valve Anti-water-hammering design
> Flow time : From 7 to 9 seconds
> Hydraulic supply : MM G 1"1/4 In line Outlet connection on flush pipe Ø 32 mm
> Material and colour finish : Body and cross-partition control in Brass Push Button in Brass, chrome finish
> Security : Anti-siphonic device
> Delivered with : 1 Ball valve integrated 1 cross partition control 15 to 200m 1 fitting out, 1 bent tube and 1 junction nozzle
> Standards & approvals : Brass body in accordance with EN 1982, EN 12164, EN 12165 Molded chrome-plated body in accordance with EN 12540 200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
433,00 €
Wall-hung BCN S WC pan
Ref. 110112
Wall-hung WC pan, 360 x 375 x 550mm.
Compatible with all standard frame systems available on the market.
Elegant and simple design.
Bacteriostatic 304 stainless steel.
Dual finish: bright polished pan interior and polished satin exterior.
Stainless steel thickness: 1.5mm.
WC bowl surface is polished with rounded edges for easy cleaning.
Concealed perimetral flushing rim.
Horizontal water inlet: Ø 55mm.
Horizontal waste outlet: Ø 100mm.
Water saving: works with 4L or more of water.
Shrouded pan.
Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
Supplied with fixing plate and 6 theft prevention TORX security screws.
CE marked. Complies with European standard EN 997 for 4L flush.
10-year warranty.
Weight: 12kg.
1718,00 €
PMR XS TC wall-mounted washbasin
Ref. 160250
Wall-mounted washbasin, cross wall installation for service ducts.
Basin internal diameter: 310mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin.
200mm threaded rod can be cut to size (other lengths available on request.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standardEN 14688.
Weight: 4.5kg.
TECHNICAL FEATURES
PMR XS TC wall-mounted washbasin
Ref. 160250
Height | 130mm |
---|---|
Length | 390mm |
Width | 400mm |
Thickness | 1.2mm |
Finish | 304 polished satin stainless steel |
709,00 €