Käterätikuivati on valmistatud messingist. (brass)
Полотенцесушители выполнены из латуни
Käterätikuivati elektrielemendi kaitse IP67
Käterätikuivati elektrikätikuivatile IP44-IP55
Степень защиты электрического элемента IP67
Степень защиты электрического полотенцесушителя IP44-IP55
Maksimaalne temperatuur 60°C
максимальная температура 60°C
Võimalikud viimistlused Chroom +...%
Возможные покрытия Chroom +...%
Nagi 2-ne HEWI, matt jet black 90
Väga hea värviline lahendus lasteaias, koolis või ülikoolis
Matt edition
Artiklinumber: 801.90B040
HEWI sarja 801 topeltkonks riiulipuudele Topeltkonks edaspidise riputusega konksudega, 90 mm lai, 165 mm kõrge ja 87 mm sügav, keskelt keskele 75 mm, valmistatud kvaliteetsest matt polüamiidist vastavalt HEWI värvikaardile, komplektis kinnitustarvikud.
Sarja 801 topeltkonks riiulipuudele
topeltkonks edaspidise riputusega konksudega riiete ja esemete riputamiseks 90 mm lai, 165 mm kõrge ja 87 mm sügav, keskelt keskele 75 mm valmistatud kvaliteetsest matt polüamiidist vastavalt HEWI värvikaardile
Крючок 2-х HEWI,
Отличное цветовое решение для детских садов, школ или университетов Матовое исполнение
Артикул: 801.90B040
Крючок серии 801 HEWI для полок Двойной крючок с крючками, направленными вперед, шириной 90 мм, высотой 165 мм и глубиной 87 мм, центр-центр 75 мм, изготовлен из качественного матового полиамида согласно цветовой карте HEWI, в комплекте крепежные материалы.
Серия 801 двойной крючок для полок
двойной крючок с крючками, направленными вперед для подвешивания одежды и предметов ширина 90 мм, высота 165 мм и глубина 87 мм, центр-центр 75 мм изготовлен из качественного матового полиамида согласно цветовой карте HEWI
Matt edition
Article number 801.90B040
Reframe | Soap shelf and shower wiper
Soap shelf and shower wiper Black
Unique soap shelf with hidden magnets in the wall fitting to give the wiper a permanent, functional and practical home.
The soap shelf is made of a strengthened steel plate with a groove to drain the water off it. Around the edge is a thin laser-cut ‘anti-slip’ barrier, to help stop shampoo and other bathroom products sliding off the shelf when it is wet.
The wiper has just two parts – a high-quality silicone element and a strengthened steel frame. This design distributes the pressure quite evenly across the whole surface and ensures that it is cleaned effectively and consistently. The wiper has silicone bumpers on the ends, to protect tiles and other surfaces from scratches. The silicone element is very hard-wearing and lasts a long time.
The pack contains fittings, screws and an Unbraco key for assembly.
Kohustuslik märge projekti spetsifikatsioonis: PEGU OÜ
HEMI inset round washbasin Ø 310mm - Ref. 120470
Round basin for recessed installation from above or below.
Basin internal diameter: 310mm.
Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm. One-piece, seam-free pressed bowl.
Rounded edges prevent injury. Supplied with 1¼" waste. Without overflow.
CE marked.
Complies with European standard EN 14688. Weight: 1.5kg.
[Formerly ref: 0213470201]
1092х383х80 мм
Stainless steel rectangular mirror, H. 500mm
Ref. 3452
| Depth | 10mm |
|---|---|
| Length | Unbreakable mirror |
| Width | 385mm |
| Drop height | 485mm |
| Finish | "Mirror" polished 304 stainless steel |
AFO 01 is a stainless steel wall-mounted drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 01 stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
AFO 01 is made of stainless steel AISI 304.
AFO 01.CL is made of stainless steel AISI 316 and is suitable into the areas with higher concentration of chlorine (e.g. swimming pools).
Sensor-controlled fountain possible made to order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
| Water inlet | G 1/2" |
| Water pressure | 0,2 – 0,6 MPa (recommended 0,3 MPa) |
| Outlet | d = 40 mm |
| Inner dimension of the fountain | d = 245 mm |
| Weight | 4 kg |
AFO 01.S is a drinking fountain of stainless steel with pressure valve designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
Automatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.S is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
| dimensions | 330 x 900 x 365 mm |
| outlet | d = 40 mm |
| water inlet | G 1/2" |
| water pressure | 0,2 – 0,6 MPa, recommended 0,3 MPa |
| weight | 12 kg |
AFO 01.SCL is a drinking fountain with cooling and spout for filling bottles designed to stand and to be attached to wall. User can select between uncooled water and water running through a flow cooler. Uncooled water is used for bottle filling as a standard – can be changed. Start/stop control by piezo-buttons – resistant solution. Facility keeper can set a time period after which the water flow automatically stops.
The product contains a flow cooler. It is not a design with cooled tank only where – after the pre-cooled amount of water is pumped out – the user has to wait for the next charge to be cooled.
Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.
Automatic drinking fountain (with a sensor) can be supplied per order.
AFO 01.SCL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
| dimensions | 330 x 900 x 365 mm |
| water outlet | d = 40 mm |
| water inlet | G 1/2" |
| water pressure | 0,2 – 0,6 MPa, recommended 0,3 MPa |
| power supply | 230 V, 50 Hz |
| power input | 830 W |
| weight | 25 kg |
Copyright ⓒ 2016 www.pegu.ee Kõik õigused kaitstud. Pegu OÜ
.png?_t=1680353642)