for WP 121
150 x 410 x 260 mm

0,5 kg

for WP 120
150 x 365 x 260 mm

0,5 kg

Freestanding floor stand for DAN DRYER touchfree disinfectant dispensers. Easy to place and move around.

Focus on infection control makes the unit ideal for any high-traffic area near entrances, at buffets, in restaurants, canteens, daycares and common areas.

As a bonus feature this unit can be equipped with a drip tray to catch excess sanitizer to keep your floors remaining clean. The drip tray, article no. 3172, is available as an optional accessory.

Clean hands count! Practising hand hygiene is a simple yet effective way to prevent infections!

Freestanding floor stand for DAN DRYER touchfree disinfectant dispensers. Easy to place and move around.

Focus on infection control makes the unit ideal for any high-traffic area near entrances, at buffets, in restaurants, canteens, daycares and common areas.

As a bonus feature this unit can be equipped with a drip tray to catch excess sanitizer to keep your floors remaining clean. The drip tray, article no. 3172, is available as an optional accessory.

Clean hands count! Practising hand hygiene is a simple yet effective way to prevent infections!

Freestanding floor stand for DAN DRYER touchfree disinfectant dispensers. Easy to place and move around.

Focus on infection control makes the unit ideal for any high-traffic area near entrances, at buffets, in restaurants, canteens, daycares and common areas.

As a bonus feature this unit can be equipped with a drip tray to catch excess sanitizer to keep your floors remaining clean. The drip tray, article no. 3172, is available as an optional accessory.

Clean hands count! Practising hand hygiene is a simple yet effective way to prevent infections!

297-STAINLESS DESIGN DISPENSER FOR DISINFECTANT, MANUALLY OPERATED

3140-BJÖRK MANUAL DISPENSER W/GEO WHITE TOPPLATE

3150-BJÖRK MANUAL DISPENSER W/OSLO TOPPLATE

3140-BJÖRK MANUAL DISPENSER W/GEO WHITE TOPPLATE

Surface push-button soap dispenser. Spray soap.

80 x 298 x 120 mm

• Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• One-hand operation disinfectant pump with 950 ml tank. 
• Designed for standard disinfectants.
• Inspection slot to indicate fill level. 
• Accessible for refilling through lockable, hinged housing. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material.

• Weight (in kg): 1,4

80 x 298 x 120 mm

• Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• One-hand operation disinfectant pump with 950 ml tank. 
• Designed for standard disinfectants.
• Inspection slot to indicate fill level. 
• Accessible for refilling through lockable, hinged housing. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material.

• Weight (in kg): 1,4

148 x 448 x 120 mm
950 ml tank

• Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Further available surfaces: see below.
• One-hand operated and non-drip disinfectant pump with 950 ml tank. 
• Tank with large, lockable refill opening.
• Designed for standard disinfectants. 
• Inspection slot to indicate fill level. 
• Accessible for refilling through lockable, removable front panel with fall protection. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• Wear parts and front panel can be replaced as modules. 
• Installation dimensions: 150 x 450 x 110 mm
• Mounting: With four screws in wall opening through fixing holes in the side walls. 
• Delivery includes fixing material and first fill with soap.

• Weight (in kg): 3,0

86 x 298 x 121 mm

• Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
• Designed for standard disinfectants.
• Inspection slot to indicate fill level. 
• Accessible for refilling through lockable, hinged housing. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  Power supply available as an option.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material and batteries.

• Weight (in kg): 1,8

86 x 298 x 121 mm

• Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
  Further available surfaces: see below.
• With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
• Designed for standard disinfectants.
• Inspection slot to indicate fill level. 
• Accessible for refilling through lockable, hinged housing. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  Power supply available as an option.
• Wear parts can be replaced as modules.
• Mounting: With two screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material and batteries.

• Weight (in kg): 1,8

148 x 448 x 120 mm
950 ml tank

• Sensor disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Further available surfaces: see below.
• With EWAR® eModule touch-free operated disinfectant pump with 950 ml tank. 
• Tank with large, lockable refill opning.
• Designed for standard disinfectants. 
• Inspection slot to indicate fill level. 
• Accessible for refilling through lockable, removable front panel with fall protection. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
• eModule battery-powered with two 1.5 V Baby/LR14 batteries.
  Power supply available as an option.
• Wear parts and front panel can be replaced as modules.
• Installation dimensions: 150 x 450 x 110 mm
• Mounting: With four screws in wall opening through fixing holes in the side walls. 
• Delivery includes fixing material and batteries.

• Weight (in kg): 3,4

Desinfektandi sensoriga kontaktivaba dosaator Elegance 1.1L (pattarei), valge plastik

Kontaktivaba desoaine dosaator mahuga 1,1 liitrit (900 - 1100 doosi). Seinapealne paigaldus. Töötab 4 x 1,5 V pattareiga. Toimib desinfitseerivat lahust pihustades

718-TOUCH-FREE ELEGANCE F/DISINFECTANT

718-TOUCH-FREE ELEGANCE F/DISINFECTANT

93 x 290 x 225 mm
1000 ml bottle

• Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
• Half-open stainless steel housing; visible surfaces satin finished and brushed. 
• Elbow-operated disinfectant pump, can be set to different levels and autoclaved. 
• Designed for standard 1000 ml disposable bottles of disinfectant. 
• Accessible for refilling from the front side. Lockable cover plate in stainless steel as an option for a surcharge.
• Further accessories for a surcharge: drip tray 
• Wear parts can be replaced as modules.
• Mounting: With three screws through holes in the back wall. 
• Delivery includes fixing material.

• Weight (in kg): 1,2

80 x 245 x 220 mm
500 ml bottle

• Disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
• Half-open stainless steel housing; visible surfaces satin finished and brushed. 
• Elbow-operated disinfectant pump, can be set to different levels and autoclaved. 
• Designed for standard 500 ml disposable bottles of disinfectant. 
• Accessible for refilling from the front side. Lockable cover plate in stainless steel as an option for a surcharge. 
• Further accessories for a surcharge: drip tray
• Wear parts can be replaced as modules.
• Mounting: With three screws through holes in the back wall. 
• Delivery includes fixing material.

• Weight (in kg): 1,0

Ø 30 x 86 mm
projection 76 mm

• Tabletop disinfectant dispenser in chrome-plated brass.
• Solid body in brass; visible surfaces high-gloss chrome-plated.
• Design height:86 mm
  Outlet height: 68 mm
  Projection: 76 mm
• Non-drip disinfectant pump with 500 ml disinfectant bottle in plastics and pressure valve in brass. 
• Also available with 250 ml or 1000 ml containers in plastics.
• 500 ml container in stainless steel as an option for a surcharge.
• Designed for standard disinfectants. 
• Refillable from above by unscrewing the top part. 
• Wear parts can be replaced as modules.
• Installation dimensions: Ø 22-26 mm,
  surface thickness max. 40 mm.
• Mounting: With one counternut. 
• Delivery includes fixing material.

• Weight (in kg): 0,7

Ø 30 x 86 mm
projection 90 mm

• Tabletop disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
• Design height:86 mm
  Outlet height: 68 mm
  Projection: 76 mm
• Non-drip disinfectant pump with 500 ml disinfectant bottle in plastics and pressure valve in stainless steel. 
• Also available with 250 ml or 1000 ml containers in plastics.
• 500 ml container in stainless steel as an option for a surcharge.
• Designed for standard disinfectants. 
• Refillable from above by unscrewing the top part. 
• Wear parts can be replaced as modules.
• Installation dimensions: Ø 22-26 mm,
  surface thickness max. 40 mm.
• Mounting: With one counternut. 
• Delivery includes fixing material.

• Weight (in kg): 0,7

Ø 30 x 86 mm
projection 90 mm

• Tabletop disinfectant dispenser in robust, germ-reducing and easy-care stainless steel (AISI 316L).
• Solid stainless steel body; visible surfaces satin finished. Further available surfaces: see below.
• Design height:86 mm
  Outlet height: 68 mm
  Projection: 76 mm
• Non-drip disinfectant pump with 500 ml disinfectant bottle in plastics and pressure valve in stainless steel. 
• Also available with 250 ml or 1000 ml containers in plastics.
• 500 ml container in stainless steel as an option for a surcharge.
• Designed for standard disinfectants. 
• Refillable from above by unscrewing the top part. 
• Wear parts can be replaced as modules.
• Installation dimensions: Ø 22-26 mm,
  surface thickness max. 40 mm.
• Mounting: With one counternut. 
• Delivery includes fixing material.

• Weight (in kg): 0,7

NEWS: available October 2020. Soap and disinfectant dispensers are purchased separately. Table stand is available in black and white. The dispenser is available in 9 finishes. N1978. Nova2

NEWS: available October 2020. Soap and disinfectant dispensers are purchased separately. Table stand is available in black and white. The dispenser is available in 9 finishes. N1978. Nova2