Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCs or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Retained in upright position. Slowed down descent. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Leg provides additional reinforcement when wall fixings are not enough.
Dimensions: 850 x 825 x 120mm. 
Leg height can be adjusted from 760 - 780mm.
Tested to over 200kg. Maximum recommended user weight: 135kg. 

TECHNICAL FEATURES 

Be-Line drop-down support rail with leg, L. 850mm, white 
Ref. 511963W

Cross wall time flow tap with swivel spout :
Time flow ~7 sec. 
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm. 
Tamperproof scale-resistant flow straightener. 
Solid chrome-plated brass body M1/2".
Control ≤ 200mm and spout ≤ 230mm cut-size. 
Anti-rotating pin and back-nut. AB anti-blocking system.
AB anti-blocking system: water will flow only when the push-button is 

Group thermostatic mixing valve for mixed water distribution from 32° to 42°C: 
Anti-scalding safety. 
Regulation of temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism. 
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring). 
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
190 lpm - M1 1/2".