Tootegrupid
Снимок экрана 2019-07-31 в 18.25.12.png Zoom

Joogifontaan kinnitus seina, põrandani

Tootekood: FMM-1000A-1B
Kaubamärk:
Ühik: tk
Tarneaeg: 7-14 päeva
Hind: 793,00 €
753,35 €
Kuumakse alates: 64,35 €
Kogus: - +
   - või -   
395x395x950 mm
 
Vandal resistant dinking fountain-glass filler
 
 
Bebedero para 1 usuario fabricado en acero inoxidable EN-10088 /1.4301 (AISI 304) de
calibre 18. Acabado superficie: Satinado-Brillo.
• Profundidad tarja: ~ 40 mm.
• Boquilla surtidor de agua de acero inoxidable antivandálica, antigiro y con barrera
sanitaria.
• Botón antivandálico.
• Puerta de registro con tornillos escamoteados.
• Entrada: Roscada, NPT 1/2”
• Salida: Manguera flexible ø25 mm.
• Sujecci
ó
n a la pared mediante tornillería
• Peso Neto: ~ 18.7 kg
• Sistema de anclaje de la puerta en el mueble que permite su apertura pero no su
retirada o caída.
• Parte inferior con sistema de nivelación regulable.
• Filos redondeado para evitar cortes.
 
• Bebedero 100% antivandálico.
Sarnased tooted
Tootekood: DE-312QU1 ,   Tarneaeg: 7 päeva
141,00 €
WC poti raam loputuskastiga , antivandaalse R/V teras katega
 

BSAZ 5

Wall module construction for WC with vandal-resistant st.steel cover

   
 
 
 

BSAZ 5 is a wall module for wall mounted toilets equipped with anti-vandal stainless steel cover – with resistant stainless safety buttons. The cover is screwed by security bolts therefore it cannot be dismounted without special tools. The system is suitable for spaces where toilet flushing from a cistern is required but where, on the other hand, there is a threat of damaging of usual plastic covers. The robust anti-vandal stainless cover contains stainless control buttons resistant to damage (unlike the usual plastic buttons).

 

The cover of BSAZ 5 is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

 

 

 

 
Version types
BSAZ 5 - Wall module construction for WC with vandal-resistant st.steel cover
 
 
Basic technical information
Dimensions of wall module: (1000–1200) × 510 × (160–200) mm
Dimensions of st.steel cover: 510 × 230 × 30 mm
Water inlet: G 1/2"
Outlet: DN 100
 
 
Requirements for setting up the construction
  1. Space for mounting the wall module
  2. Water inlet G 1/2"
  3. Waste pipe for outlet connection (DN 100)
 
 
Complete delivery
  • wall module with cistern
  • st.steel cover with vandal-proof buttons
 
Tootekood: AZP-BSAZ 5 ,   Tarneaeg: 3-4 nädalad
1055,00 €
Antivandaalne R/V teras piezo dušisi nupp, eelsegatud veele,  ilma el.adaptorita
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Tootekood: AZP-AUS 11 ,   Tarneaeg: 3-4 nädalad
375,00 €

Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" waste with plug and overflow.

Tootekood: I-L1 ,   Tarneaeg: 14 -21 päeva
330,00 €

FP-001 Drinking fountain for foor installation made of 1mm thick stainless steel.

Supplied with a push button water bubbler.

Basin polished fnish Cover grinding fnish

* Customized height for children available. Made of Stainless Steel AISI 304 (1.4301)

Tootekood: FP-001 ,   Tarneaeg: 7 nädalad
799,71 € (5%)
841,80 €
Projektide hinnapäringud ja tooteinfo kättesaadavusega seotud küsimused palume saata e-mailile info@pegu.ee