Kätekuivati elektriline Wagner Ewar 2000W R/V teras harjatud
HOT AIR HAND DRYER WP 1100
298 x 396 x 150 mm
- Hot air hand dryer in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - Touch-free, low-failure capacitive sensor technology, sensor distance 0–30 cm, power cut-off after 30 s drying time.
- Low noise.
- SEV-tested and certified.
- Supply voltage 230 V, 50 Hz
Power rating 2000 Watt
Heater power 1915 Watt
Motor power 85 Watt
Air output 258 m³/h - Blower unit can be replaced as module.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and device plug.
- Weight (in kg): 7,2
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733010 |
highly polished | 731010 |
(coloured) plastic powder - coating | 729010 |
Hot air hand dryer in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. Low noise blower unit with capacitive sensor technology, sensor distance 0-30 cm, drying time 30 s factory setting, can be replaced as module. Power rating 2000 W. SEV-tested and certified. Delivery includes fixing material and device plug, mains cable supply on site 230 V/50 Hz.
Dimensions: 298 x 396 x 150 mm
Article No. WP1100
Kätekuivati Mediclinics Machflow poleeritud rostevaba terasest korpusega AISI304
Turvaline ja võimas mudel.
-Ülekiire kuivatusaeg
-Minimaalne Energiakulu
-Minimaalset CO2 heitmeid
-Reguleeritav ülekiire mootor
-Kindel ja kompaktne disain
-GreenSeci nimekirjaar
Kuivatuseaeg on ainult 10-15 sek!!!
512,00 €
Ühes tükis ABS termoplast korpus
Termoplastistist alus
Termokaitselülitiga B-klass harjadega mootor
Korpuse paksus 3 mm
Pinge 220-240 V
Elektriisolatsiooni klass II
Voolutarve 4,8A
Kaal 1,2kg
Koguvõimsus 1110W
Eeldav kuivatusaeg 39 sek
122,00 €
Ühes tükis ABS termoplast korpus
Termoplastistist alus
Termokaitselülitiga B-klass harjadega mootor
Korpuse paksus 3 mm
Pinge 220-240 V
Elektriisolatsiooni klass II
Voolutarve 4,8A
Kaal 1,2kg
Koguvõimsus 1110W
Eeldav kuivatusaeg 39 sek
171,00 €
Sensori komplekti on vaja vahetada kui masin töötab , kas koguaeg, või ei tööta üldse.
233,83 €
78,28 €