Tootegrupid
jpg_187000_1.jpg Zoom

Kirurgiline valamu kõrge pritsmekaitsega pesurenn 2100mm roostevaba teras satiin AISI304

Tootekood: DE-187000
Kaubamärk:
Ühik: tk
Tarneaeg: 14-21 päeva
Hind:
4532,00 €
Kuumakse alates: 385,22 €
Kogus: - +
   - või -   

Kirurgiline valamu kõrge pritsmekaitsega pesurenn 2100mm roostevaba teras satiin AISI304

Kirurgiline valamu kõrge pritsmekaitsega
Tootekood: 187000
Viimistlus: Poleeritud satiin 304 roostevaba teras – 3 töökoha jaoks – "Hygiene+" disain

Kirjeldus

Seinapealne kirurgiline valamu, millel on 450 mm kõrgune pritsmekaitse. Sobib kasutamiseks haiglates ja tervishoiuasutustes.

Valmistatud bakteriostaatilisest 304 roostevabast terasest. Poleeritud satiinviimistlus ja 1,2 mm terase paksus. Valamu on 700 mm pikk, mõeldud ühele töökoha jaoks, ilma kraaniavata.

  • Sile pind ja ümarad sisemised servad lihtsaks puhastamiseks.
  • "Hygiene+" disain: vähendab bakterite tekkekohti, varjatud äravool ja lihtne hooldus.
  • Äravool paremal küljel.
  • Ilma ülevooluta.
  • Komplektis kinnituselemendid ja 1"1/4 äravool.

Vastab CE-märgistusele ja normile EN 14296.

Kaal: 48,5 kg


Tehnilised omadused

  • Kõrgus: 1020 mm
  • Pikkus: 2100 mm
  • Laius: 475 mm
  • Materjal: Bakteriostaatiline 304 roostevaba teras
  • Paksus: 1,2 mm
  • Viimistlus: Poleeritud satiin

Sobib kaasaegsete tervishoiuasutuste kõrgetele hügieenistandarditele!

Surgical scrub-up trough with high upstand 
Ref. 187000

Wall-mounted surgical scrub-up trough with 450mm upstand. 
Suitable for hospitals and healthcare facilities. 
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm. 
Length 2,100mm, 3 services. Without tap hole. 
Smooth surface and rounded inside edges for easy cleaning. 
"Hygiene+" design: reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. 
Supplied with fixing elements.Weight: 48.5kg.

Failid

Sarnased tooted
R/V teras veetrapp, D75 mm vertikaalne, 150x150mm
On võimalik versioonid , vertikaalsed, horisontaalsed D50mm,75mm,110mm
 
 
 
 

PV 01

stainless steel floor trap

   
 
 
 

PV 01 is a fully stainless floor trap with braz designed to drain showers, industrial premises and other inner spaces. The trap is designed as stepping (not driven-over). The trap is made of AISI 304 quality stainless steel. Detergents containing chlorine must not be used for cleaning. If chlorine is contained in the environment, we recommend custom-made model of another material (e.g. AISI 316).

For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

We produce other custom-made models – outlet d = 50 mm, 110 mm; without rim for waterproofing; alternative cover grid (mesh); without braz; with adjustable height, etc. Send us your requirements, we will promptly answer!

 

Version types
PV 01.D.75.P - floor trap d = 75 mm, smell trap, outlet down, rim for waterproofing, not adjustable
PV 01.D.75.S - floor trap d = 75 mm, smell trap , outlet down , rim for waterproofing, adjustable
PV 01.B.75.P - floor trap d = 75 mm, smell trap , outlet to the side, rim for waterproofing, not adjustable
PV 01.B.75.S - floor trap d = 75 mm, smell trap , outlet to the side , rim for waterproofing , adjustable
PV 01.D.50.P - floor trap d = 50 mm, smell trap , outlet down , rim for waterproofing , not adjustable
PV 01.D.50.S - floor trap d = 50 mm, smell trap , outlet down , rim for waterproofing , adjustable
PV 01.B.50.P - floor trap d = 50 mm, smell trap , outlet to the side , rim for waterproofing , not adjustable
PV 01.B.50.S - - floor trap d = 50 mm, smell trap , outlet to the side , rim for waterproofing , adjustable
PV 01.D.110.P - floor trap d = 110 mm, smell trap , outlet down , rim for waterproofing , not adjustable
PV 01.D.110.S - floor trap d = 110 mm, smell trap , outlet down , rim for waterproofing , adjustable
PV 01.B.110.P - floor trap t d = 110 mm, smell trap , outlet to the side , rim for waterproofing , not adjustable
PV 01.B.110.S - floor trap d = 110 mm, smell trap , outlet to the side , rim for waterproofing , adjustable
 
 
Basic technical information
Minimum inner diameter: 70 mm
Diameter of connecting sewerage pipe: 75 mm
Water flow: min. 50 lts / min
Loading class: K3
Weight: 2,2 kg
 
 
Complete delivery
  • Trap body
  • Grid with braz cover
  • Hook to pull up the grid
 
 

 

Requirements for setting up the construction
  1. Completed sewerage drains terminated by DN 75 coupling
  2. Prepared hole in the floor with diameter min. 300 mm (200 mm without rim for waterproofing) and depth min. 120 mm
 
Tootekood: AZP-PV 01.D.75.P ,   Tarneaeg: 3-4 nädalad
423,00 €
Antivandaalne WC pott R/V taras
 
 

AUZ 08

stainless-steel standing closet, with hardened seat, back drain

   
 
 
 

AUZ 08 is a stainless-steel WC in matt design. To increase the user comfort, it is provided with a grey seat with a lid made of hardened plastic (newly also with a seat in black design AUZ 08.CS). AUZ 08 is designed to stand on the floor at the wall; it is suitable for places where the common closet cannot be attached to the wall, because of a thin bearing particle, for example. The standard version of AUZ 08 has a back drain (the version with the bottom drain AUZ 02). It is suitable to supplement the WC with the automatic pressure water flushing device AUZ 3, automatic flushing device with the piezo button AUZ 3.P (or the vandal-resistant flushing device BSAZ 01) or any flushing device with a cistern.

 

Thanks to its resistance to damage, the closet is primarily intended for social facilities with demanding operation, such as highway lay-byes, alehouses, etc., where easy maintenance of sanitary conditions is required. WC is also manufactured in the design for the disabled under the designation AUZ 08 INV

 

Further closet versions can be found in the section Stainless-steel closets or Stainless-steel safety closets.

 

 
Basic technical information
Water inlet: d= 34-50 mm
Min. water flow: 70 l/min
Outlet: d= 90 mm
Weight: 23 kg
 
 
Requirements for setting up the construction
  1. Set-up outlet d = 110 mm including rubber sleeve for pipe d = 90 mm.
  2. Set-up water inlet d= 34-50 mm according to chosen sealing.
 
 
Complete delivery
  • Stainless steel closet
  • Plastic seat
  • Anchoring material
 
 
Made to order
  • AUZ 3 - automatic pressure flushing system
  • AUZ 3.P - automatic pressure flushing system with piezo control
  • BSAZ 01 - vandal resistant pressure flushing system
 
Tootekood: AZP-AUZ 08 ,   Tarneaeg: 3-4 nädalad
2452,00 €

automatic washing system for soles with rotary brushes - 230V, 50Hz

 

RMP 02 is a stainless steel sensor-controlled washing system with rotary brushes for wellingtons. A built-in photocell sensor reacts to the user holding the handrail. The electromagnetic valve switches on, opens the water inlet, the brushes start to rotate and the circular jet injection of the disinfecting lotion is carried out. After placing the foot with the wellington on the grid in between the rotary brushes, the sole is cleaned by means of the horizontal brush. There is a CENTRAL/STOP button on the handrail for emergency switch-off.
The washing system is intended for free standing installation on the floor. Imperfections in the floor are balanced out by four adjustable hobs. The construction of the system allows the outlet to be placed above floor level. Large pieces of dirt are collected by a sieve, which can be easily cleaned. The sieve and brush can be taken out without using a tool.
The RMP 02 washing system, with its easy maintenance, is mainly intended for operations where quick removal of mechanical dirt from wellingtons is required.
The canister with disinfecting solution is not part of the delivery.

Package contents

  • body of the washing machine
  • removable grid
  • electronics with photocell
  • rotary brush
  • hand brush
  • jerican holder
  • priming hose
  • adjustable supporting legs
  • central stop button

 

Radius of sensor 0,5 m
Water inlet G 1/2“
Water pressure 0,1 – 1,0 MPa
Outlet G 6/4”
Electricity protection IP 55
Power supply 230 V, 50 Hz
Power requirement 370 W
Water temperature max. 42°C
Weight 41 kg

 

  • Set up water inlet as per picture
  • Set up outlet G 6/4” via effluvial cover
  • Set up cable for power supply – 230 V, 50 Hz

 

Tootekood: AZP-RMP 02 ,   Tarneaeg: 3-5 nädalat
10323,00 €

REDO wall-mounted washbasin 
Ref. 121710

Wall-mounted washbasin. 
Basin internal diameter: 320mm. 
Clean and simple design. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.2mm. 
Rounded edges prevent injury. 
With central tap hole Ø 35mm. 
Supplied with 1 ¼" waste. 
Without overflow. 
Supplied with fixing elements. 
CE marked. Complies with European standard EN 14688. 
Weight: 3kg. 

 

TECHNICAL FEATURES

REDO wall-mounted washbasin 
Ref. 121710

Height 150mm
Length 375mm
Width 430mm
Thickness 1.2mm
Finish 304 polished satin stainless steel

Tootekood: DE-121710 ,   Tarneaeg: 14 päeva
525,00 €

Joogifontään põranda/sein pudeli täitmisega, mehaaniline R/V teras AISI304

AFO 01.SL

drinking fountain with spout for filling bottles designed to stand and to be attached to wall

AFO 01.SL is a drinking fountain with spout for filling bottles designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed. Second pressure valve serves for bottle filling.

In standard version the fountain is produced with a niche suitable for filling the bottle of 0.7 l. Fliountain with a niche for filling the botlles of 1.5 l can be made on order. 

Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting. 

TAutomatic drinking fountain (with a sensor) can be supplied per order.

AFO 01.SL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1). 

Package contents

  • Stainless housing with cone
  • Pressure valve with jet
  • Pressure valve for bottle filling
  • Flexible hose outflow
  • Fixing and connecting material
dimensions 330 x 900 x 365 mm
water outlet d = 40 mm
water inlet G 1/2"
water pressure 2 - 6 Bar, recommended 3 Bar
weight 12 kg

 

  • Set up water outlet d = 40 mm
  • Set up water inlet G 1/2"

 

Tootekood: AZP-AFO01.SL ,   Tarneaeg: 3-4 nädalad
1917,00 €
Projektide hinnapäringud ja tooteinfo kättesaadavusega seotud küsimused palume saata e-mailile info@pegu.ee