298 x 396 x 150 mm

• Hot air hand dryer in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
  Further available surfaces: see below.
• Touch-free, low-failure capacitive sensor technology, sensor distance 0–30 cm, power cut-off after 30 s drying time.
• Low noise.
• SEV-tested and certified.
• Supply voltage 230 V, 50 Hz
  Power rating 2000 Watt
  Heater power 1915 Watt
  Motor power 85 Watt
  Air output 258 m³/h
• Blower unit can be replaced as module.
• Mounting: With four screws through key holes and one optional anti-theft hole in the back wall. 
• Delivery includes fixing material and device plug.

• Weight (in kg): 7,2

Gray 110L gray recycling bin. Extreme range. 
Hot-dip galvanized steel, anti-corrosion primer and anti-UV powder. 
Color gray manganese. 
Extreme range warranty 3 years. 
Holding the bag by elastic belt. 
Mounting on wall or on post (ref: 57841). 
Solution to the Vigipirate plan. 
Bag 110L. 
Dimension: 470X420X120 

350 x 580 x 210 mm
1 paper roll + 1 reserve roll

• Sensor paper roll dispenser with cabinet for reserve roll, mains-operated, in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
  Further available surfaces: see below.
• With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
  Mains-operated 230 V / 50 Hz; power rating 7 Watt; mains cable on site.
  TÜV/GS-tested and certified. 
• Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
• Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
• Accessible for refilling through lockable door. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
• Wear parts and front panels can be replaced as modules.
• Installation dimensions: 352 x 582 x 180 mm
• Mounting: With four screws in wall opening through fixing holes in the side walls. 
• Delivery includes fixing material and first fill with one paper roll.

• Weight (in kg): 12,4