Group thermostatic mixing valve for hot water circulating loops adjustable from 44°C to 58°C: 
Anti-scalding safety. 
Regulates temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism.
Thermal shocks are possible. 
Interchangeable cartridge with automotive cell. 
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C minimum. 
Pressure differences at the inlets: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring) for bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
15% energy savings: optimised heat loss (comparison between a circulating loop at 55°C and a non-circulating system at 70°C). 
Safety and prolongation of system life span (Hot water at >65°C leads to premature aging within the system). 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
140 lpm - M1 1/4 ".

Be-Line drop-down support rail for people with reduced mobility. 
In the lowered position use as a grab bar, as a support for standingand for assisting movement, for WCS or showers. 
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of barsin a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for people with reduced mobility. 
Slowed down descent. Retained in upright position. 
Aluminium tube. 
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip. 
Matte white powder-coated aluminium finish provides a good visual contrast with the wall. 
Uniform surface for easy maintenance and hygiene. 
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick. 
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls. 
Dimensions: 850 x 210 x 120mm. 
Tested to over 200kg. Maximum recommended user weight: 135kg

TECHNICAL FEATURES 

Be-Line drop-down support rail, L. 850mm, white 
Ref. 511964W