Tootegrupid
Kaubamärgid
Sooduspakkumised
Soodus
Laost otsas
Rossignol HEXATRI Sorteerimise prügikast 50L, kollane/valge teras
Rossignol HEXATRI Sorteerimise prügikast 50L, kollane/valge teras
Tootekood: RHE50KO/VA ,   Tarneaeg: 21 päeva

PUBLIC TRASH CAN / STEEL / RECYCLING / CONTEMPORARY
HEXATRI 50 L

Rossignol Hexatri recycling bin 50 liter without lock made of steel

L501 x W435 x H765 mm

  • Type: public

  • Material...: steel

  • Options and accessories: recycling, contemporary

     

    Description

    • Anti-UV powder coated steel
    • Inner bucket in polypropylene with handle in
    chrome stainless steel
    • Polypropylene pads avoiding contact with the ground
    • Installation in a covered area

450,18 € (-10%) 500,20 €
Lisa korvi
Soodus
Laost otsas
Dušitugi L-kujuline 800x800x70 valge
Dušitugi L-kujuline 800x800x70 valge
Tootekood: MBD2700 ,   Tarneaeg: 14-21 päeva

Dušitugi L-kujuline 800x800x70 valge

Horisontaalne nurga käetugi, 3-punkti kinnitus. Toru d 32 mm. 

 

• 90º wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90º.

• Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.

• Stainless steel gives this bar great durability and great resistance to rust.

• The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once installed.

• Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.

• Supplied with all the necessary hardware to fix the bar to a brick wall.

General description

Mediepoxi / Medinox series

BD0700C BD0700CS Bright finish Satin finish

         

  • 90o wall to wall horizontal grab bar for showers, baths and changing rooms, with three anchoring points and with snap flange covers, made with stainless steel tube, folded in an "L" shape at 90o.

  • Designed to achieve barrier-free accessibility in bathrooms and public spaces. This grab bar is suitable for specific spaces for the elderly or people with reduced mobility. Model suitable for collectivities.

  • Stainless steel gives this bar great durability and great resistance to rust.

  • The bar has three snap flange covers that conceal the anchoring screws to the wall and reinforce, even more, the beauty of the product once

    installed.

  • Optionally, these bars can be electrically isolated by installing the Electrical Isolation Kit code KA0020.

  • Supplied with all the necessary hardware to fix the bar to a brick wall.

    Components and materials

  • BD2700: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube white finish.

  • BD2700B: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 201 stainless steel tube matte black finish.

  • BD0700C: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube bright finish.

  • BD0700CS: 90o wall to wall horizontal grab bar with three anchoring points, made with AISI 304 stainless steel tube satin finish.

  • TUBING: made of stainless steel 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the

    diameter along the bends.

  • CONCEALED WALL BRACKET: three units made of stainless steel sheet, 3 mm thick and joined to the bar by welding to the ends of the

    tube. It has three holes (BD2700 and BD2700B) or two holes (other references), with a diameter of 6.5 mm that allow the fixing of the bar

    to the wall.

  • SNAP FLANGE COVER: three units that conceal the installation screws made of 1.5 mm thick polypropylene (BD2700 and BD2700B) or

0.8 mm thick stainless steel (other references).

 

 

 

94,50 € (-10%) 105,00 €
Lisa korvi
Soodus
Laost otsas
Kätepaberidosaator uputatud sensoriga Wagner Ewar 1+1 roll pattareiga R/V teras poleeritud
Kätepaberidosaator uputatud sensoriga Wagner Ewar 1+1 roll pattareiga R/V teras poleeritud
Tootekood: WAG-WP1611P ,   Tarneaeg: 14-21 päeva

Kätepaberidosaator uputatud sensoriga Wagner Ewar 1+1 roll pattareiga R/V teras poleeritud

ELECTRONIC TOUCH-FREE PAPER ROLL DISPENSER BATTERY POWERED WP 1411

350 x 580 x 210 mm
1 paper roll + 1 reserve roll

Choose product variant

  • Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
  • All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
    Further available surfaces: see below.
  • With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm.
    Paper length and idle time adjustable.
    Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
  • Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
  • Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
  • Accessible for refilling through lockable door. 
  • Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
  • Wear parts and front panels can be replaced as modules.
  • Installation dimensions: 352 x 582 x 180 mm
  • Mounting: With four screws in wall opening through fixing holes in the side walls. 
  • Delivery includes fixing material and first fill with one paper roll.
  • Weight (in kg): 12,4
AVAILABLE SURFACESORDER NUMBERS
satin finished (standard) 733280
highly polished 731280
(coloured) plastic powder - coating 728280
Suggested text for specifications:

Sensor paper roll dispenser with cabinet for reserve roll, battery-powered, in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. With touch-free operated, capacitive sensor technology. Paper length and idle time adjustable. Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. Designed for one paper roll and one reserve roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. Inspection slot to indicate fill level. Accessible for refilling through lockable door. Residual roll function allows a reserve roll to be inserted before residual roll is completely used up. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and first fill with one paper roll. 

Dimensions: 350 x 580 x 210 mm

Article No. WP1411
1014,13 € (-5%) 1067,50 €
Lisa korvi
Soodus
Laost otsas
Nagi 2-ne Mediclinics roostevaba teras harjatud AISI304
Nagi 2-ne Mediclinics roostevaba teras harjatud AISI304
Tootekood: MAI0036CS ,   Tarneaeg: 14-21 päeva

• Surface mounted double robe hook, satin finish, made in AISI 304 stainless steel .

• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.

• Model suitable for the hotel sector, elderly centers, homes and for collectivities.

• Screws and plugs for installation to the wall are provided.

13,50 € (-10%) 15,00 €
Lisa korvi
Soodus
Laost otsas
Kosmos nagi seinale teras
Kosmos nagi seinale teras
Tootekood: L1208614 ,   Tarneaeg: 7 päeva

Kosmos nagi seinale teras

14,69 € (-15%) 17,28 €
Lisa korvi
Vaata veel
Uudised
Esileht » Registreeru kasutajaks

Registreeru kasutajaks

Kui Sul on juba konto olemas, siis logi siit sisse.

Sinu andmed

Ettevõte:
Kohustuslik juhul, kui soovid arveid ettevõtte nimele.
KMKR Nr.:
Eesnimi: *
Perenimi: *
E-post: *
Telefon:
  Nõustun privaatsuspoliitikaga. Loe lähemalt
  Liitu uudiskirjaga

Salasõna

Kasutajanimi: *
Salasõna: *
Salasõna uuesti: *
Registreeru
Projektide hinnapäringud ja tooteinfo kättesaadavusega seotud küsimused palume saata e-mailile info@pegu.ee