• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced
mobility. Models suitable for public use.
Well suited for keeping bathrooms and public enclosures barrier-free.
Highest durability and great resistance to rusting.
Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
Supplied with plugs and screws to fix the bar to a brick wall.
Components and materials
BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
Unidrain on trapitootja, kes esmakordselt nihutas põrandatrapi seina äärde. Seinaäärne lahendus pakub tehniliselt läbimõeldud paigaldust ja lõpptulemusena esteetilist pilti.
KVADRAT Unidrain 10x10 CustomTrapi veetrappi komplekt horisontaalne plaaditav. 75mm
Tile Solution with Low Construction Height
The discreet 10 x 10 tile solution is only available from Unidrain.
Kvadrat sampak
Varenummer8021.0075
VVS nummer 155100813
Komplet kvadratisk afløb. Pakken indeholder HighLine Custom-base 10×10 mm, stålarmatur, vandlås, udløbshus Ø75 mm vandret med sideindløb, 3 stk. reduktioner (2 stk. til 40 mm rør og 1 stk. til 32 mm rør).
Armaturet kan højdejusteres +/- 10mm i udløbshuset og drejes 360°.
Speciallim medfølger til påklæbning af egen flise på Custombase. Glidemiddel til gummipakninger, krog og renseserviet medfølger.
KVADRAT Unidrain 10x10 CustomTrapi veetrappi komplekt vertikaalne plaaditav. 110mm
Tile Solution with Low Construction Height
The discreet 10 x 10 tile solution is only available from Unidrain.
Kvadrat sampak
Varenummer8022.0110
VVS nummer 155100826
Komplet kvadratisk afløb. Pakken indeholder HighLine Custom-base 10×10 mm, stålarmatur, vandlås, udløbshus Ø75 mm vandret med sideindløb, 3 stk. reduktioner (2 stk. til 40 mm rør og 1 stk. til 32 mm rør).
Armaturet kan højdejusteres +/- 10mm i udløbshuset og drejes 360°.
Speciallim medfølger til påklæbning af egen flise på Custombase. Glidemiddel til gummipakninger, krog og renseserviet medfølger.