Peeglikapp 4 funktsiooniga: kraan, seebidosaator, kätekuivati
Ref. 510204
Kirjeldus:
Stiilne ja funktsionaalne peeglikapp 4 funktsiooniga: peegel, kontaktivaba kraan, automaatne seebidosaator ja kätekuivati. Valmistatud kvaliteetsest 304 roostevabast terasest ja viimistletud mati musta melamiiniga.
- Puutevaba hügieen: kõik funktsioonid aktiveeruvad infrapunandurite abil.
- Kiire paigaldus: üks elektriühendus ja reguleeritavad kinnitused.
- Tänapäevane disain: valgustatud piktogrammid ja musta klaasi detailid.
Funktsioonid:
- Automaatne kraan: reguleeritav veevool (1,4–6 l/min) ja kaitse ummistumise vastu.
- Seebidosaator: suur 5-liitrine paak, sobib vedelseebile.
- Kätekuivati: kiire 360 km/h õhuvool, madal energiatarve ja müra (74 dBA).
- Integreeritud LED-valgustus ja praktiline hoiuruum.
Mõõdud: 800 x 223 x 1,000 mm.
Sobib suurepäraselt nii avalikku ruumi kui ka moodsasse kodusesse vannituppa.
Mirror cabinet with 4 functions
Mirror, hand dryer, soap dispenser and electronic tap
DESCRIPTION
Mirror cabinet with 4 functions
Ref. 510204304 stainless steel designer cabinet with a matte black melamine finish.
Touch-free for improved hygiene: soap dispenser, tap and hand dryer are activated automatically when hands are detected by infrared sensor.
Quick and easy to install:
- A single electrical connection for all the elements: mains supply with 230V / 50-60Hz.
- Connects to the water supply from the top or from inside the cabinet.
- Water connection in M3/8".
- Concealed fixings. Mirror cabinet supplied with stainless steel screws for concrete or reinforced wood.
- Adjustable hinges.
Unit with 4 functions:
4mm thick glass mirror and black glass strip with illuminated pictograms.
Automatic soap dispenser:
- No-waste pump dispenser
- Large capacity tank: 5 litres.
- Suitable for vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s or specific foam soap.
Electronic basin tap*:
- Reduced stagnation solenoid valve.
- Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 to 6 lpm.
- Scale-resistant flow straightener.
- Duty flush (~60 seconds every 24 hours after the last use).
- Stopcock.
Air-pulse hand dryer:
- High-speed.
- Pulsed air at 360km/h. Airflow: 36 l/second.
- Low energy consumption: 704W.
- Noise level: 74 dBA.
- Class I, IP23.
- 3-year warranty.
Basin lit by the LED strip.
Vandal-resistant model with standard DELABIE key.
Anti-blocking: stops automatically if used continuously.
Internal storage shelf.
Several cabinets can be installed side-by-side to create a mirror wall: linking screws are provided.
Dimensions: 800 x 223 x 1,000mm.
Weight: 39kg.
TECHNICAL CHARACTERISTICS
Mirror cabinet with 4 functions
Ref. 510204Supply | Mains: 230V / 50-60Hz |
Connector | M3/8" |
Technology | Electronic |
Height | 1,000mm |
Depth | 223mm |
Width | 800mm |
Flow rate | Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 to 9 lpm |
Thickness | Glass mirror: 4mm |
Finish | 304 stainless steel with a matte black melamine finish |
Sanicondens Clim Mini kondensaadipump
Tootekirjeldus :
Sanicondens Clim Mini on loodud spetsiaalselt kliimaseadmete kondensaadi efektiivseks eemaldamiseks. Kompaktne ja diskreetne pump töötab väga vaikselt ning sobib paigaldamiseks nii kodu- kui ka ärikeskkondadesse.
Põhiomadused:
- Sobib kliimaseadmete kondensaadi eemaldamiseks
- Väga vaikne töö
- Kompaktne disain: lihtne paigaldada ja diskreetne välimus
- Ühildub 8-10 mm torustikuga
- Komplektis 1,5 m painduv voolik, paigaldusklamber ja toitekaabel
- Kaheaastane garantii
Tehnilised andmed:
- Pumba mõõtmed (P x L x K): 104 x 28 x 49 mm
- Anduri mõõtmed (P x L x K): 74 x 37 x 37 mm
- Voolukiirus: 15 l/h
Sanicondens Clim Mini tagab usaldusväärse ja pikaajalise töö lihtsa paigaldusprotsessiga.
Sanicondens Clim Mini
The Sanicondens Clim Mini has been specifically designed to expel the condensate from air conditioning units.
- Designed for air conditioning units
- Very quiet operation
- Discharges through 8-10mm pipework
- Flow rate 15L/h
The Sanicondens Clim Mini will expel the condensate from air conditioning units. It is easy to install and is a discreet pump that is very quiet. It discharges through 8-10 mm pipework. The Sanicondens Clim Mini comes with a 2 year warranty.
Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanicondens Clim Mini offers you peace of mind and with the back-up from our service team and 2 year warranty there’s never been a better time to install a Saniflo.
183,00 €
Sanicondens Clim Pack kondensaadipumba komplekt
Tootekirjeldus :
Sanicondens Clim Pack on ideaalne lahendus kliimaseadmete kondensaadi eemaldamiseks. Komplekt sisaldab vaikset ja kompaktset Clim Mini pumpa ning kärbitavat kaablikanalisatsiooni, mis tagab viimistletud ja diskreetse paigaldustulemuse.
Põhiomadused:
- Loodud kliimaseadmete kondensaadi eemaldamiseks
- Sisaldab kärbitavat kaablikanalisatsiooni elegantseks lõpptulemuseks
- Väga vaikne töö
- Ühildub 8-10 mm torustikuga
- Komplektis: Clim Mini pump, painduv voolik (1,5 m), kaablikanalisatsioon ja paigaldusklamber
- Kaheaastane garantii
Tehnilised andmed:
- Voolukiirus: 15 l/h
- Pumba mõõtmed: 104 x 28 x 49 mm
- Anduri mõõtmed: 74 x 37 x 37 mm
Sanicondens Clim Pack pakub tõhusat ja viimistletud lahendust, tagades usaldusväärse töö ja pikaajalise vastupidavuse.
Sanicondens Clim Pack
The Sanicondens Clim Pack has been specifically designed to expel the condensate from air conditioning units. The pack contains the Clim Mini pump plus trimmable trunking for a neat finish.
- Designed for air conditioning units
- Supplied with trunking that can be trimmed to size
- Very quiet operation
- Flow rate 15L/h
The Sanicondens Clim Pack will expel the condensate from air conditioning units. It is easy to install and comes with trimmable trunking for a neat finish. The Sanicondens Clim Pack is a discreet pump that is very quiet. It discharges through 8-10 mm pipework. The Sanicondens Clim Mini comes with a 2 year warranty.
Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanicondens Clim Mini offers you peace of mind and with the back-up from our service team and 2 year warranty there’s never been a better time to install a Saniflo.
244,00 €
HEWI valamu kõrgusastmega, 4 kohta, läbipaistev sinine tõke 1800mm VASAK
Kirjeldus / Описание:
HEWI kõrgusastmega valamu on valmistatud mineraalkomposiidist ning sobib ideaalselt laste päevahoiu keskustesse ja mängualadele. Valamu on kaetud sileda ja hügieenilise alpinvalge pinnaga, mis on kergesti puhastatav. Selle unikaalne disain sisaldab kahte ristkülikukujulist ühendatud basseini, millel on suured ümarad servad. Valamu kõrguse erinevus 125 mm võimaldab nii väikestel kui suurematel lastel seda mugavalt kasutada.
Ülemine vasak bassein on suurem ja sügavam, alumine bassein väiksema sügavusega, mis teeb selle eriti sobivaks veemängudeks. Komplekti kuulub läbipaistev sinine Perspex-tõke, mis on osaliselt vettpidav ja lisab mängulisust. Valamul puudub ülevool ning see on varustatud kahe tõusutoruklapiga vee kogumiseks.
- Laius: 1800 mm
- Kõrgus: 265 mm
- Sügavus: 460 / 395 mm
- Valamukausi sügavus: 125 mm
- Valmistatud vastupidavast materjalist, mis talub kõrgeid temperatuure kuni 80 °C lühiajaliselt.
Valamu on ette valmistatud neljale ühe auguga segistile, kuid soovi korral saab seda tellida ilma segistiaukudeta (tarneaeg ~4 nädalat). Toode vastab EN 14688 standardile ning omab CE ja UKCA tähistust.
Row washbasin with height graduation
{Version left, 4 places, transparent blue baffle
Article number 950.12.305}
made of mineral composite, alpine white, 2 interconnected rectangular basins with large radii, upper left washbasin, the lower basin has a smaller depth, incl. transparent baffle made of Perspex in blue, width 1800 mm, height 265 mm, depth 460 / 395 mm, height offset 125 mm, without overflow, incl. 2 standpipe valves for water accumulation, prepared for 4 single-hole tap, washbasin without tap hole available on request without surcharge (delivery time: approx. 4 weeks)s, weight capacity to EN 14688, CE and UKCA marking according to Construction Products Regulation No. 305/2011.
- Especially suitable for child daycare centres
- Made of mineral composite with non-porous surface, alpine white
- 2 interconnected rectangular basins with large radii
- Upper left washbasin
- Height offset 125 mm
- 1800 mm wide, 265 mm high and 460 / 395 mm deep
- The lower basin has a smaller depth
- Incl. transparent baffle made of Perspex in blue, suitable for water play (not completely sealing)
- Without overflow, incl. 2 standpipe valves for water accumulation
- wash trough depth 125 mm
- Prepared for 4 single-hole taps
- For hanger bolt fastening
- Weight capacity to EN 14688
- easy to clean - standard market colours for children can be removed without leaving any residue
- CE and UKCA marking according to Construction Products Regulation No. 305/2011
- High water temperature (e.g. when carrying out thermal disinfection): change resistant up to 65 °C, resistant up to 80 °C over a load period of 5 minutes
- washbasin without tap hole available on request without surcharge (delivery time: approx. 4 weeks)
Sanicubic 2 Pro purustuspump
Tootekirjeldus :
Sanicubic 2 Pro on loodud vastama ärikeskkondade ja intensiivse kasutuse nõudmistele. See sisaldab kahte eraldiseisvat, koormust tasakaalustavat mootorit, mis töötavad vaheldumisi, tagades ühtlase kulumise. Ülevoolu korral töötavad mõlemad mootorid samaaegselt, ning rikete korral võtab üks mootor automaatselt üle.
Pump on võimeline käitlema jäätmevett mitmetest allikatest: WC, kraanikauss, dušš, vann, pesumasin, nõudepesumasin ja bidee. Disaini kuuluvad hõlpsasti eemaldatavad mootorid ja veetaseme indikaator, mis muudavad hoolduse lihtsaks.
Sanicubic 2 Pro omadused:
- Maksimaalne tõstekõrgus: 13 m
- Maksimaalne vooluhulk: 15 m³/h
- Paigaldusvõimalused: 4 sisendit (40–110 mm)
- Kogumaht: 45 L
- Kasulik maht: 17,5 L
- Töötemperatuur: kuni 70 °C (5 min)
- IP-reiting: IP68
Sanicubic 2 Pro tagab turvalisuse kahel moel – juhtmega ja kaugjuhtimisega häiresüsteemid. Toode on loodud Prantsusmaal ja pakub rahuolu tänu 60-aastasele kogemusele ja innovatsioonile.
Sanicubic 2 Pro
The Sanicubic 2 Pro is a high performance macerator pump for commercial use. It contains two separate, load balanced pumps with high performance macerating systems and will operate alternatively. In the event of inflow overload, both motors run at the same time or in the unlikely event that one motor fails, the other one will take over.
- Takes waste from WC’s, basin, bath, shower, bidet, washing machine, dishwasher and sink.
- Tough, reliable macerator ideal for busy business environments and commercial situations
- New design with easily removable motor for servicing and maintenance
- Pumps vertically 13m
The Sanicubic 2 Pro is a tough, reliable macerator pump which contains two separate load balanced macerator systems which operate alternately ensuring even wear of motors. It is ideal for busy business and commercial situations. The unit can handle waste water from WC’s, a basin, sink, washing machine, dishwasher, shower, bath, and bidet. The Sanicubic 2’s new design means the motors are easily removable for servicing and maintenance as is the water level indicator. It has two alarms for ultimate safety a hard-wired alarm and a remote wireless alarm. The Sanicubic 2 Pro has four inlets, the centre height of inlets is 140mm and it discharges through 50 mm pipework. It has a working temperature of 35ºC, however it will handle temperatures up to 75ºC for short periods. The Sanicubic 2 has a tank capacity of 45 litres and a flow rate 13m³/h. It can be connected to a Building Management System. The Sanicubic 2 Pro comes with a 2 year warranty.
Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanicubic 2 offers you peace of mind and with the back-up from our service team there’s never been a better time to install a Saniflo.
4026,00 €
195,00 €
• Square towel ring made of AISI 304 stainless steel satin finish, 0.8 mm thick, for wall mounting.
• Long lasting life thanks to the quality of its AISI 304 stainless steel construction.
• Suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms and for public use.
• With no removable components.
• It normally goes along with a stainless steel soap dispenser.
• Screws and plastic plugs for brick walls are provided.
37,00 €
COMBINATION SOAP- AND PAPER TOWEL DISPENSER WP 506
448 x 148 x 164 mm
ca. 250 paper towels / 1000 ml soap tank
- Combination consisting of a liquid soap dispenser and a paper towel dispenser in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Liquid soap dispenser with one-hand operated and non-drip soap pump with 1000 ml tank and pressure valve in brass.
- Tank with large, lockable refill opening.
- Designed for standard liquid soaps. Accessible for refilling through lockable, removable front panel with fall protection.
- Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 250 standard paper towels in zigzag- or c-fold.
Paper size (folded): 240-250 mm x 100-115 mm.
Accessible for refilling through lockable front flap. - Keyed alike cylinder locks in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 450 x 150 x 154 mm
- Mounting: With four screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 4,3
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 727613 |
highly polished | 731613 |
(coloured) plastic powder - coating | 728613 |
Combination consisting of a liquid soap dispenser and a paper towel dispenser in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Liquid soap dispenser with one-hand operated and non-drip soap pump with 1000 ml tank and pressure valve in brass. Designed for standard liquid soaps. Accessible for refilling through lockable, removable front panel with fall protection. Paper towel dispenser with deep-drawn paper removal opening, filling quantity approx. 250 paper towels. Accessible for refilling through lockable front flap. Keyed alike cylinder locks in corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack of paper towels.
Dimensions: 448 x 148 x 164 mm
Article No. WP506
658,80 €
92,00 €
Soovitav äravooluläbimõõt:22/28/32 mm
Normaalne temperatuur: 35 C
Siseneva vee maksimaalne temperatuur :75 C
Kaitseklass: IP44
Elektrivarustus:220-240V/50 HZ
Mootori nimivõimsus:400W
Kaal:6,4 kg
688,00 €
Süvistatav prügikast
süvistussügavus 150mm
Diameeter 380mm
Mahtuvus 2,5l/20-30 lehte
Koti mõõt 39x28CM
Nähtav osa :
Rõngas :poleeritud kroom, naturaalne messing.
harjatud kroom, harjatud R/V teras või 14 rinevat
värvitooni.
Mahuti materjal :värvitud PC/ABS
RS1/B Must Mahuti
2-ne Valamu jalaga 1200x700, kõrgus 850mm , R/V teras
Нержавеющая большегрузная двойная мойка на ножках, 1200 x 700 x 850 мм
Характеристики
- stainless steel bulk double-sink with a sheating
- without a tap hole (could be made to order)
- possibility of fine plane regulation by the regulation screws on the supporting legs
- possibility to order inner sinks in dimensions: 400 x 300 x 200 mm/ 400 x 400 x 250 mm/ 400 x 400 x 200 mm
- available also in the length 1400 mm
- material CrNi 18/10 (AISI-304)
- brushed finish
- different dimensions could be made to order
Арт. № | 93160 |
Название | SLUN 16 |
Kroom FMM-nr:1641-0000
- Temperatuuriseade nupuga, akutoitel (aku kaasas)
- Vandalismikindel, kest üleni metallist
- ECO funktsioon (vett ja energiat säästev õhusti 5 l/min)
- Aegreleega loputuse lõpetus üleujutamise vältimiseks
- 30-sekundiline loputusaeg (anduriga)
- Võimalik välja lülitada 60 sekundiks (näiteks puhastamiseks)
- Madal voolutarve, pikk eluiga
- Võimalik kuuma veega läbi loputada, et desinfitseerida legionella vastu
- IP-klassi andur, IP67
- Keskkonnasõbralik materjal, pliivaba, niklivaba
Paigaldamine: - Anduri automaatne kalibreering
- Pärast seadistamist sobivale temperatuurile, on võimalik nupp asendada ehiskaanega
- Kõiki mudeleid on võimalik kasutada nii 6V aku toitel või 12V vooluadapteriga
- Võrguvoolu kasutamiseks on tarvis paigaldada vooluadapter 1623-0000 ja toide FMM 1619-4000 või teise võimalusena trafo FMM 1619-3000
- Pehmed PEX® voolikud koos integreeritud tagasilöögiklappide ja filtritega (roostevabast terasest)
- Ava läbimõõt Ø 33,5–37 mm
Seaded: - Reguleeritav maksimaalne temperatuur
- Programmeeritav hügieeniloputuse funktsioon
- Seadistatav loputusaeg
Keskselt juhitav mudel: - Komplektis kaabel, millega on võimalik juhtida hügieeniloputust
- Loputus toimub, kui sissevool on suletud
Aeraator M24x1-A kroom, (vanni, dushi, thermostaat segistile)
Aeraator Presto 291***