Kvaliteetne Santehnika ja Vannitoa Aksessuaarid |PEGU.ee
For orders from European Union countries, please send a price inquiry to our email. To calculate the shipping cost, please provide the address. For companies, include your VAT number.
.webp)
Sanicondens Pro kondensaadipump
Tootekirjeldus :
Sanicondens Pro on loodud happelise kondensaadi eemaldamiseks gaasi- ja õlikateldest, külmikutest, kliimaseadmetest ja õhukuivatitest. Tänu oma suurele 2,2-liitrisele paagile vähendab pump sagedaste käivituste vajadust, pikendades seeläbi mootori eluiga.
Põhiomadused:
- Kompaktne ja lihtne paigaldada (komplekt kaasas)
- Kaks sisendpunkti
- Maksimaalne vertikaalne pumpamiskõrgus: 4,5 m
- Maksimaalne horisontaalne pumpamisulatus: 50 m (1% kallakuga)
- Madal müratase: <45 dBA
- Sisaldab tagasilöögiklappi ja 6 m painduvat väljalasketoru
Sanicondens Pro on seintele kinnitatav või põrandale asetatav, mistõttu sobib see paindlikult erinevateks kasutusjuhtudeks. Prantsusmaal valmistatud toode on testitud ja toetub 60-aastasele kogemusele. Kaasas 2-aastane garantii.
Sanicondens Pro
The Sanicondens Pro is specifically designed for disposal of acidic concentrate from boilers and other water producing equipment such as air conditioning units, refrigeration units and dehumidifiers etc. Includes a non-return valve and 6m flexible discharge pipe. Similar to Sanicondens Best Flat, but for use where a neutralising tray is not required.
- Designed to dispose of acidic condensate
- Two entry points
- Pumps up to 4.5m vertically or 50m horizontally
- Noise level <45dBA
- Flexible : Possible connections with gas and oil boilers
- Easy Installation : Complete installation kit
- Compact
- Large tank volume (2,2 L)
The Sanicondens Pro is the complete solution for removing acid condensate from gas and oil boilers (using Sanineutral or Sanineutral mini), refrigerated display cases, air conditioners, air conditioning units and dehumidifiers.
The Sanicondens Pro has 2 inlets and is supplied with a check valve. It can be wall mounted or floor standing.
It is easy to install thanks to its complete installation kit. Its large tank (2.2L) is designed to prolong the life of the motor by avoiding too frequent starts.
This unit can discharge up to 4.5m vertically and horizontally up to 50m with a 1% fall. The Sanicondens Pro comes with a 2 year warranty.
Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanicondens Pro offers you peace of mind and with the back-up from our service team and 2 year warranty there’s never been a better time to install a Saniflo.
239,00 €
Reovee ja WC pumpla SANICUBIC 1 WP (sobib:WC pott + valamu + dušš + vann + pesumasin + nõudepesumasin )
Sanicubic 1 WP veejäätmepump
Tootekirjeldus :
Sanicubic 1 WP on ideaalne lisaruumide ja korterite jaoks, kus on vaja eemaldada jäätmevesi mitmest veesisendist. Seade on varustatud võimsa 1500 W mootoriga, millel on kõrge vooluhulk kuni 15 m³/h ja IP68 veekindluse reiting. Integreeritud tagasilöögiklapid suurendavad kasutusmugavust ja paindlikkust.
Tehnilised andmed:
- Mootor: 1500 W (P1), 1050 W (P2)
- IP-reiting: IP68
- Maksimaalne tõstekõrgus: 13 m
- Maksimaalne vooluhulk: 15 m³/h
- Sisselaske diameetrid: 40, 50, 100, 110 mm
- Väljalaske toru: 50 mm
- Kogumaht: 32 L
- Kasutatav maht: 10 L
- Max. vee temperatuur: 70 °C (5 minutit)
- Materjalid: PP, PA 12 GF
Sanicubic 1 WP
2545,00 €
Peegel Alma 80 LED-valgustusega 800x34x450
Tootekirjeldus :
Alma 80 on spetsiaalselt Surgery S kirurgilise valamu jaoks loodud LED-valgustusega peegel. Selle kaasaegne ristkülikukujuline disain lisab ruumile stiili ja praktilisust. LED-valgustus tagab optimaalse nähtavuse ja kasutusmugavuse ka kõige nõudlikumates meditsiinilistes keskkondades.
Tehniline informatsioon:
- Seeria: Alma
- Mõõdud (LxSxK): 800 x 34 x 450 mm
- Kuju: Ristkülikukujuline
Sanicondens Clim Pack kondensaadipumba komplekt
Tootekirjeldus :
Sanicondens Clim Pack on ideaalne lahendus kliimaseadmete kondensaadi eemaldamiseks. Komplekt sisaldab vaikset ja kompaktset Clim Mini pumpa ning kärbitavat kaablikanalisatsiooni, mis tagab viimistletud ja diskreetse paigaldustulemuse.
Põhiomadused:
- Loodud kliimaseadmete kondensaadi eemaldamiseks
- Sisaldab kärbitavat kaablikanalisatsiooni elegantseks lõpptulemuseks
- Väga vaikne töö
- Ühildub 8-10 mm torustikuga
- Komplektis: Clim Mini pump, painduv voolik (1,5 m), kaablikanalisatsioon ja paigaldusklamber
- Kaheaastane garantii
Tehnilised andmed:
- Voolukiirus: 15 l/h
- Pumba mõõtmed: 104 x 28 x 49 mm
- Anduri mõõtmed: 74 x 37 x 37 mm
Sanicondens Clim Pack pakub tõhusat ja viimistletud lahendust, tagades usaldusväärse töö ja pikaajalise vastupidavuse.
Sanicondens Clim Pack
The Sanicondens Clim Pack has been specifically designed to expel the condensate from air conditioning units. The pack contains the Clim Mini pump plus trimmable trunking for a neat finish.
- Designed for air conditioning units
- Supplied with trunking that can be trimmed to size
- Very quiet operation
- Flow rate 15L/h
The Sanicondens Clim Pack will expel the condensate from air conditioning units. It is easy to install and comes with trimmable trunking for a neat finish. The Sanicondens Clim Pack is a discreet pump that is very quiet. It discharges through 8-10 mm pipework. The Sanicondens Clim Mini comes with a 2 year warranty.
Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanicondens Clim Mini offers you peace of mind and with the back-up from our service team and 2 year warranty there’s never been a better time to install a Saniflo.
244,00 €
Peeglikapp 4 funktsiooniga
Ref. 510205
Kirjeldus:
Peeglikapp 4 funktsiooniga: peegel, elektrooniline kraan, seebidosaator ja paberrätikute dosaator. Valmistatud mattmustast melamiinist ja 304 roostevabast terasest.
Kasutajasõbralik ja hügieeniline, tänu infrapunasensoritele aktiveeruvad kraan ja seebidosaator automaatselt.
Lihtne paigaldus: üks elektriühendus ja veeliitmik (M3/8") sobivad nii seinale kui ka kapi sisemusse. LED-valgustusega peegel ja vandalismikindel disain.
Mirror cabinet with 4 functions
Ref. 510205
Designer cabinet with a matte black melamine and 304 stainless steel finish.
Touch-free for improved hygiene: tap and soap dispenser activated automatically when hands are detected by infrared sensor.
Quick and easy to install:
- A single electrical connection for all the elements: mains supply with 230V / 50-60Hz.
- Connects to the water supply from the top or from inside the cabinet.
- Water connection in M3/8".
- Concealed fixings. Mirror cabinet supplied with stainless steel screws for concrete or reinforced wood.
- Adjustable hinges.
Unit with 4 functions:
4mm thick glass mirror and black glass strip with illuminated pictograms.
Automatic soap dispenser:
- No-waste pump dispenser
- Large capacity tank: 5 litres.
- Suitable for vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s or specific foam soap.
Electronic basin tap*:
- Reduced stagnation valve.
- Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 to 6 lpm.
- Scale-resistant flow straightener.
- Duty flush (~60 seconds every 24 hours after the last use).
- Stopcock.
Paper towel dispenser:
- Dispenses one sheet at a time.
- Dimensions: 120 x 275 x 360mm.
- Contents: 500 sheets.
Basin lit by the LED strip.
Vandal-resistant model with standard DELABIE key.
Anti-blocking: stops automatically if used continuously.
Internal storage shelf.
Several cabinets can be installed side-by-side to create a mirror wall: linking screws are provided.
Dimensions: 600 x 223 x 1,000mm.
Weight: 28kg.
TECHNICAL CHARACTERISTICS
Mirror cabinet with 4 functions
Ref. 510205| Supply | Mains: 230V / 50-60Hz |
| Connector | M3/8" |
| Technology | Electronic |
| Height | 1,000mm |
| Depth | 223mm |
| Width | 600mm |
| Flow rate | Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 to 6 lpm |
| Thickness | Glass mirror: 4mm |
| Finish | Matte black melamine and 304 stainless steel |
WASTE BIN WP 133
298 x 598 x 140 mm
12 l
- Waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Equipped with removable mesh basket. Capacity approx. 12 l. Accessible through lockable door with self-closing, flame-retardant disposal flap.
- Also suitable for use as a hygiene waste bin with the optional plastic hygiene bin WP33.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts can be replaced as modules.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material.
- Weight (in kg): 5,7
402,60 €
71,00 €
-
Components y materials
-
FOLDING BAR: folded in a trapezoidal shape and manufactured with a 32 mm diameter AISI 304 stainless steel tube satin finish. Both bar ends are welded to the vertical column, made of a 32 mm diameter stainless steel AISI 304 tube. The grip zones of the bar have a safety anti-slip finish to improve the user safety. It incorporates a paper roll holder 120 mm length, made of a 6 mm diameter AISI 304 stainless steel rod.
-
WALL MOUNTING PLATE: made of an AISI 304 stainless steel satin finish rectangular plate of 125 x 100 mm and 10 mm thick. It incorporates four Ø 8 mm countersunk holes, to fix the bar to the wall.
-
FLOOR MOUNTING PLATE: made of an AISI 304 stainless steel satin finish circular plate of Ø 75 mm and 5 mm thick. It incorporates three Ø 7 mm countersunk holes to fix the bar on the floor.
-
UNLOCK HANDLE: made of black thermoplastic.
BG0089CS Satin finish
Technical specifications
Dimensions
Grab bar and column diameter Wall mounting plate thickness Floor mounting plate thickness Paper roll holder diameter
700 x 835 x 100 mm
Ø 32 mm 10.0 mm 5.0 mmØ 6.0 mm
542,00 €
COMBINATION PAPER TOWEL DISPENSER AND WASTE BIN WP 5110
298 x 1198 x 220 mm
ca. 500 paper towels / 32l
- Combination consisting of a paper towel dispenser and a waste bin in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed.
Further available surfaces: see below. - Paper towel dispenser with deep-drawn paper removal opening for easy paper removal.
- Designed for approx. 500 standard paper towels in zigzag fold.
Paper size (folded): 240-250 mm x 100-115 mm. - Inspection slot to indicate fill level.
- Accessible for refilling through lockable front flap with fall protection.
- Waste bin equipped with removable mesh basket. Capacity approx. 32 l. Accessible through front flap.
- Keyed alike cylinder lock in corrosion-resistant zinc die-casting.
- Wear parts and front panels can be replaced as modules.
- Installation dimensions: 300 x 1200 x 110 mm
- Mounting: With six screws in wall opening through fixing holes in the side walls.
- Delivery includes fixing material and one pack of paper towels.
- Weight (in kg): 14,4
| AVAILABLE SURFACES | ORDER NUMBERS |
|---|---|
| satin finished (standard) | 727526 |
| highly polished | 731526 |
| (coloured) plastic powder - coating | 729526 |
Combination consisting of a paper towel dispenser and a waste bin in stainless steel (AISI 304) for flush mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Paper towel dispenser with deep-drawn paper removal opening, filling quantity approx. 500 paper towels. Inspection slot to indicate fill level. Accessible for refilling through lockable front flap with fall protection. Waste bin equipped with removable mesh basket. Capacity approx. 32 l. Accessible through front flap. Keyed alike cylinder lock in corrosion-resistant zinc die-casting. Delivery includes fixing material and one pack of paper towels.
Dimensions: 298 x 1198 x 220 mm
Article No. WP5110
1268,80 €
132,00 €
Süvistatav prügikast
süvistussügavus 150mm
Diameeter 380mm
Mahtuvus 2,5l/20-30 lehte
Koti mõõt 39x28CM
Nähtav osa :
Rõngas :poleeritud kroom, naturaalne messing.
harjatud kroom, harjatud R/V teras või 14 rinevat
värvitooni.
Mahuti materjal :värvitud PC/ABS
RS1/B Must Mahuti
2-ne Valamu jalaga 1200x700, kõrgus 850mm , R/V teras
Нержавеющая большегрузная двойная мойка на ножках, 1200 x 700 x 850 мм
Характеристики
- stainless steel bulk double-sink with a sheating
- without a tap hole (could be made to order)
- possibility of fine plane regulation by the regulation screws on the supporting legs
- possibility to order inner sinks in dimensions: 400 x 300 x 200 mm/ 400 x 400 x 250 mm/ 400 x 400 x 200 mm
- available also in the length 1400 mm
- material CrNi 18/10 (AISI-304)
- brushed finish
- different dimensions could be made to order
| Арт. № | 93160 |
| Название | SLUN 16 |
Kroom FMM-nr:1641-0000
- Temperatuuriseade nupuga, akutoitel (aku kaasas)
- Vandalismikindel, kest üleni metallist
- ECO funktsioon (vett ja energiat säästev õhusti 5 l/min)
- Aegreleega loputuse lõpetus üleujutamise vältimiseks
- 30-sekundiline loputusaeg (anduriga)
- Võimalik välja lülitada 60 sekundiks (näiteks puhastamiseks)
- Madal voolutarve, pikk eluiga
- Võimalik kuuma veega läbi loputada, et desinfitseerida legionella vastu
- IP-klassi andur, IP67
- Keskkonnasõbralik materjal, pliivaba, niklivaba
Paigaldamine: - Anduri automaatne kalibreering
- Pärast seadistamist sobivale temperatuurile, on võimalik nupp asendada ehiskaanega
- Kõiki mudeleid on võimalik kasutada nii 6V aku toitel või 12V vooluadapteriga
- Võrguvoolu kasutamiseks on tarvis paigaldada vooluadapter 1623-0000 ja toide FMM 1619-4000 või teise võimalusena trafo FMM 1619-3000
- Pehmed PEX® voolikud koos integreeritud tagasilöögiklappide ja filtritega (roostevabast terasest)
- Ava läbimõõt Ø 33,5–37 mm
Seaded: - Reguleeritav maksimaalne temperatuur
- Programmeeritav hügieeniloputuse funktsioon
- Seadistatav loputusaeg
Keskselt juhitav mudel: - Komplektis kaabel, millega on võimalik juhtida hügieeniloputust
- Loputus toimub, kui sissevool on suletud
Aeraator M24x1-A kroom, (vanni, dushi, thermostaat segistile)
Aeraator Presto 291***
