Mööblikäepide alusega FROST VEST d50mm RST, harjatud kuld

VEST with back plate furniture knob. H1037.

Manufactured in stainless steel. Designed by Bønnelycke mdd.

The knob is also available without a back plate. Depth: 27 mm

Peegli valgustus LED MIRROR BACKLIGHT, trafoga Frost peeglidele Ø1000 mm U4131,U4141, IP44

Sisaldab LED-valgustit ja transformaatorit. Ümmargusele peeglile Ø1000 mm U4131 ja U4141. Peegel tuleb osta eraldi. LED-valguse värvitemperatuur: 2700K. Reiting: IP44. Saadaval alates suvest 2024.

SPECIFIKATSIOON

Sügavus: 18 mm

Diameeter: Ø900 mm

Kaal: 6 kg

Disain: Bønnelycke MDD

incl. LED light and transformer. For round mirror Ø900 mm U4131 and U4141. Mirror is purchased separately. LED colour temperature: 2700K. Rating: IP44. Available from summer 2024

SPECIFICATION

• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.

• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.

• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.

• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.

• Adjustable power motor to regulate power consumption between 180 and 850 W.

• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).

• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.

• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.

• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

Keevisõmbluseta korpus on aluste kinnitatud kahe vandaalikindla poldiga ja lukustatud spetsiaalse Saniflow võtmega

3mm paksune alumiinium alus

Tulekindlast plastist ventilaatorikamber

Termostaatlülitiga F-klassi universaalne harjadega mootor

Alumiiniumist tsentrifugaalne topeltsümmetriline õhuvõtuventilaatori tiivik

Elemendi on termokaitselüliti

Elektroisolatsioon klass 1

Kaitseklass IP23

for WP 120
77 x 187 x 70 mm

0,3 kg

350 x 448 x 210 mm
1 paper roll

• Sensor paper roll dispenser, battery-powered, in robust, germ-reducing and easy-care stainless steel (AISI 304).
• All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
  Further available surfaces: see below.
• With touch-free operated, capacitive sensor technology, sensor distance approx. 3.5 cm. Paper length and idle time adjustable.
  Battery-powered with four standard 1.5 V Mono/LR20/12 A batteries. 
• Designed for one paper roll with dimensions: Width 215 mm, outer diameter max. 180 mm, inner diameter 50 mm. 
• Inspection slot to indicate fill level, residual roll function allows a reserve roll to be inserted before residual roll is completely used up. 
• Accessible for refilling through lockable door. 
• Keyed alike cylinder lock in corrosion-resistant zinc die-casting. 
• Wear parts can be replaced as modules.
• Mounting: With four screws through key holes in the back wall. 
• Delivery includes fixing material and first fill with one paper roll.

• Weight (in kg): 10,3