Delabie хозяйственная/утилизационная напольная раковина Н/Р сталь AISI304

Н/Р сталь, мойка, 500x500x190mm

Valamu R/V terasest

Garaazi/avalikude ruumidele

Артикул: PLVR36-NC-S , Время доставки: 7-14 päeva

569,00 €

FM Mattson незамерзающий садовый кран 400мм, с ключом ХОЛОДНАЯ+ГОРЯЧАЯ вода

Laos

Garden valve for cold and hot water

For cold and hot water
With approved non-return valves
Can be cut to suit wall thickness
Wall bracket: H=70 mm, W=180 mm, screw holes c/c 164 mm

Артикул: 4282-0050 , Время доставки: 7-14 дней

349,00 €

Незамерзающая автоматическая поилка для лошадей и коров d60cm

DRINKING SYSTEM

Frost-free drinking system for cattle and horses
Fresh and clean water for the animals all year round
Without wiring or electricity
A minimum of maintenance
No concern about filling the drinking vessels
No concern about cleaning the drinking vessels

Automaatjootjad sobivad kasutamiseks nii karjamaal kui ka tallides ning nende läheduses asuvates joogikohtades.

Jootjaid on lihtne kasutada ning hobused saavad kiiresti aru, et mugavam on vee juurdevoolu avamiseks vajutada klapile

mitte nina otsaga vaid selle ülaosaga. Kui koon (mokad) on joomiseks vabad, joobki hobune loomulikul viisil vee pindmiselt

kihilt. Seetõttu olemegi valinud jooginõuks lai ja sügav kauss, et tekiks joomiseks mugav veepind.

Töötamise põhimõte

Tõusutoru on varustatud isetühjeneva 3-tee

ventiiliga, mis on paigaldatud kaevu, mis omakorda

on süvistatud pinnasesse.

Kui jootjat ei kasutata on veest tühi nii ventiil kui

ka tõustoru, milles olev vesi võiks muidu külmuda.

Nii jootja ventiil ja tõusutoru on külmumiskindlad nii

kaua kuni on külmumiskindel ka vee toitetorustik.

Артикул: FL-A362 , Время доставки: 14-21 день

1152,90 €

Питьевой фонтан free-standing механический Н/Р сталь AISI304

AFO 02 - IIstainless steel free-standing drinking fountain (indoor/outdoor)

AFO 02-II is a stainless steel drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The drinking fountain is to be placed in an open space. It is made up of an anchoring part intended for embedding in concrete and the column itself with a press valve and nozzle. These parts are connected by means of 3 screws and the upper part can be, therefore, easily dismounted in case of necessity (e.g. during winter).
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 02-II stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
Drinking fountain AFO 02-II is manufactured from the stainless steel AISI 304. AFO 02.CL-II is made of the stainless steel AISI 316 and is suitable for places with higher concentration of chlorine.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).Detail of the bowl

Package contents

stainless steel column and cone with nozzle
press valve
anchoring construction
flexible hose siphon
connecting hoses
anchoring material

Set-up water inlet - pipe G 1/2“
Set-up drainage d = 40 mm
Prepared alcove for embedding (concreting) in the base construction

Water inlet	G 1/2"
Water pressure	2 – 6 Bar, recommended 3 Bar
Outlet	d = 40 mm
Inner dimensions of sink	d = 290 mm
Weight	20 kg

Артикул: AZP-AFO02 , Время доставки: 3-4 недели

1531,00 €

Питьевой фонтан напольный/настенный с наполнителем для бутылки ,механический Н/Р сталь AISI304

AFO 01.SL

drinking fountain with spout for filling bottles designed to stand and to be attached to wall

AFO 01.SL is a drinking fountain with spout for filling bottles designed to stand and to be attached to wall. Water runs for the time for which the valve is pressed plus the pre-set period after it is released; thus the jet can be rinsed. Second pressure valve serves for bottle filling.

In standard version the fountain is produced with a niche suitable for filling the bottle of 0.7 l. Fliountain with a niche for filling the botlles of 1.5 l can be made on order.

Water supply is provided by a flexible hose, trap comprises an elastic flexible couple. Flexible design of water supply and outflow allows variable and easy connection of the drinking fountain as well as its dismounting.

TAutomatic drinking fountain (with a sensor) can be supplied per order.

AFO 01.SL is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).

Package contents

Stainless housing with cone
Pressure valve with jet
Pressure valve for bottle filling
Flexible hose outflow
Fixing and connecting material

dimensions	330 x 900 x 365 mm
water outlet	d = 40 mm
water inlet	G 1/2"
water pressure	2 - 6 Bar, recommended 3 Bar
weight	12 kg

Set up water outlet d = 40 mm
Set up water inlet G 1/2"

Артикул: AZP-AFO01.SL , Время доставки: 3-4 недели

1917,00 €