Категории
jpg_180800_1.jpg Zoom

Delabie настенный питьевой фонтан SD Н/Р сталь

Артикул: DE-180800
Бренд:
Единица: шт
Время доставки: 14-21 день
Цена: 615,00 €
553,50 €
Kuumakse alates: 47,05 €
Кол-во: - +
   - или -   

Wall-mounted SD drinking fountain 
Ref. 180800

Wall-mounted drinking fountain. 
Bacteriostatic 304 stainless steel. 
Polished satin finish. 
Stainless steel thickness: 1.2mm. 
Rounded edges prevent injury. 
Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M3/8". 
Flat perforated waste, without screws:easy to clean and vandal-resistant. 
Recessed horizontal water outlet. 
Waste outlet 1¼" trap. 
Supplied with fixing elements.Weight: 2.4kg. 

 

 

TECHNICAL FEATURES 

Wall-mounted SD drinking fountain 
Ref. 180800

Height 150mm
Length 320mm
Width 320mm
Thickness 1.2mm
Finish 304 polished satin stainless steel

Файлы

Схожие продукты

Pissuaarikraan 1/2-1/2" 6 sek 

Isesulguva mehhanismiga, kroom

Ühendustoru on komplektis

Артикул: P31713 ,   Время доставки: 7 дней
167,20 € (5%)
176,00 €

Jooksutoru pööratav, valamule

Артикул: P30202 ,   Время доставки: 7 дней
134,90 € (5%)
142,00 €

Dušhikraan, eelsegatud veele 30 sek töötsükkel

Артикул: P38222 ,   Время доставки: 7-14 дней
204,25 € (5%)
215,00 €
Антивандалльная душевая пьезо кнопка Н/Р сталь, для смешанной воды,  без адаптора
 
 

AUS 11

Pressure button-controlled shower for heat regulated water

 

 

   
 
 
 

AUS 11 is a new type of shower fitting for single shower control. The fitting is designated for premixed water – with one water inlet and shower outlet elbow. Water is released and closed by an anti-vandal pressure button connected to electronics and an electromagnetic valve. The fitting is covered by a rust-free anti-vandal cover to prevent damage. 

The mounting system has been designed so as to make removing the cover without using tools impossible with no bolt or screw being visible. The cover can be "pushed into" the wall level even if the mount box has been walled to an incorrect depth. 

AUS 11 is identical to AUS 1P with a different design and very resistant cover sheet. 

Electronics can work in two modes: 

1) The button works on the START/STOP basis – water release/closing. If the water is not turned off upon the time adjusted by the user or manager (e.g. 20 seconds), the electronic system itself instructs water stopping. The user must press again to start water running. This significantly saves water as the user reduces the showering time. 

2) The button works on the START/STOP basis. After the time adjusted by the manager (e.g. 3 minutes) expires there is a forced break when water cannot be released. During this time, the user is forced to leave the shower or wait. This prevents needless showering – water wasting. 

 

 
Basic technical information
Water input: G 1/2“
Water pressure: 1 - 10 Bar (0,1 – 1,0 MPa)
Time of water flow: 10 s – 42,5 min in mode 1
  0 s - 42,5 min in mode 2
Power supply: 12 V, 50 Hz
Power requirement: 6 VA
Source of power supplz: ZAC 1/20 (max. 3× AUS 11)
  ZAC 1/50 (max. 8× AUS 11)
Weight: 2,0 kg
 
 
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove 150 x 75 mm for installation casket
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
 
 
Complete delivery
  • installation casket
  • input and output bolting
  • electromagnetic valve
  • spherical valve
  • covering metal plate with piezo button
  • electronics
 
 
Made to order
  • SP 1 – shower arm with water flow of 9 l/min
  • SP 2 – shower arm with water flow of 7 l/min
  • SP 3 – shower arm with water flow of 7 l/min
  • ZAC - source of power supply 12V, 50Hz
 
 
Figure
 
 
A - water inlet G 1/2"
C - electricity supply cable 12 V, 50 Hz 
G - water outlet into shower armG 1/2"
 
 
 
 
Download information about the product
AUS 11 data for projectants - ( 84 kB )
 
Артикул: AZP-AUS 11 ,   Время доставки: 3-4 недели
375,00 €

> Working pressure: 1 to 5 bar 

> Flow: 3 l/min at 3 bars - 4-position setting Anti water-hammer system > Flow time: 7 seconds - lever upwards 11 seconds - lever downwards 
> Hydraulic supply: G 1/2'' x 40 
> Thermal resistance: This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme 
> Safety: With S® antiblocking system to prevent blocking in continuous flow 
> Convenience: Soft-touch Two-coloured ergonomic lever, in glass fiber reinforced polymer 
> Delivered with: 1 Filter gasket 1 base gasket 1 fixture nut + 1 stainless steel washer 1 Nut for 12x14 tube 1 rubber flat gasket 1 coloured sticker > Standards / Approvals: Chrome-plated brass body compliant with standards NF EN1982 / NF EN12164 / NF EN12165 Nickel-Chrome surface treatment compliant with NF EN12540 Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 9227
Артикул: P64702 ,   Время доставки: 7-14 дней
197,60 € (5%)
208,00 €