Электрический рукосушитель Wagner Ewar 2000W нержавеющая сталь полированный
Если вы нашли подходящий товар, просто нажмите В КОРЗИНУ, перейдите в КОРЗИНУ, выберите ЗАКАЗ, заполните данные и выберите способ доставки. Всё так просто – покупка всего в нескольких кликах!
Бренд:
Единица: шт
Время доставки: 14-21 день
Продавец: PEGU OÜ
For orders from European Union countries, please send a price inquiry to our email. To calculate the shipping cost, please provide the address. For companies, include your VAT number.
HOT AIR HAND DRYER WP 1100
298 x 396 x 150 mm
- Hot air hand dryer in robust, germ-reducing and easy-care stainless steel (AISI 304).
- All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom.
Further available surfaces: see below. - Touch-free, low-failure capacitive sensor technology, sensor distance 0–30 cm, power cut-off after 30 s drying time.
- Low noise.
- SEV-tested and certified.
- Supply voltage 230 V, 50 Hz
Power rating 2000 Watt
Heater power 1915 Watt
Motor power 85 Watt
Air output 258 m³/h - Blower unit can be replaced as module.
- Mounting: With four screws through key holes and one optional anti-theft hole in the back wall.
- Delivery includes fixing material and device plug.
- Weight (in kg): 7,2
AVAILABLE SURFACES | ORDER NUMBERS |
---|---|
satin finished (standard) | 733010 |
highly polished | 731010 |
(coloured) plastic powder - coating | 729010 |
Hot air hand dryer in stainless steel (AISI 304) for surface mounting. All-stainless steel housing; all corners fully welded, visible surfaces satin finished and brushed with tapered glossy surface at the bottom. Low noise blower unit with capacitive sensor technology, sensor distance 0-30 cm, drying time 30 s factory setting, can be replaced as module. Power rating 2000 W. SEV-tested and certified. Delivery includes fixing material and device plug, mains cable supply on site 230 V/50 Hz.
Dimensions: 298 x 396 x 150 mm
Article No. WP1100
Keevisõmbluseta korpus on aluste kinnitatud kahe vandaalikindla poldiga ja lukustatud spetsiaalse Saniflow võtmega
3mm paksune alumiinium alus
Tulekindlast plastist ventilaatorikamber
Termostaatlülitiga F-klassi universaalne harjadega mootor
Alumiiniumist tsentrifugaalne topeltsümmetriline õhuvõtuventilaatori tiivik
Elemendi on termokaitselüliti
Elektroisolatsioon klass 1
Kaitseklass IP23
561,00 €
Mootor Machflow
136,23 €
Paper towel dispenser and Saniflow and Waste bin
The types of combined units provide:
It is entirely welded, with a paper towel dispenser with riveted tray that prevents tearing the paper; accepts C and Z folded paper towels. Saniflow® automatic hand dryer and AISI 304 stainless steel bin, which is extractible so that it may be easily dumped. Optionally, a frame is available for installing on a surface.
Paper towel dispensers + paper bins
Several solutions are provided in this category depending on the type of paper used, rolls or towels, and the capacity of the bin, which ranges from 6.1 litres to 53 litres. The paper loads range between 200 towels and 800 towels in models C/Z and 200 mm in diameter in models that use paper rolls.
1915,00 €
SPEEDJET 2 high speed air pulse hand dryer, with filters
Ref. 510623W
SPEEDJET 2 matte white two-way air pulse hand dryer.
High speed: dries in 10 to 12 seconds.
Comfort: warm air.
Antibacterial ABS for maximum hygiene.
Easy to clean and service: residual water on hands is eliminated with new automatic procedure using evaporation and sterilisation.
Features system that removes the need for a drip tray and prevents water reaching the wall or floor.
HEPA filter: prevents 99.99% of airborne bacteria.
Infrared automatic activation.
Intelligent technology: stops automatically when hands are removed.
Anti-blocking: stops automatically if used continuously for more than 30 seconds.
Dimensions: 180 x 320 x 540mm.
Weight: 7.2kg.
Energy saving: heating element stops automatically once temperature reaches > 25°C.
Low energy consumption: 1,050W in non-heating mode,1,550W in heating mode.
220-240V~ / 50-60 Hz.
Airflow: 61 l/second. Air speed: 540 km/h.
Noise level: 66 dBA.
Class II, IP21.
CE marked.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
500,00 €