Mediclinics Рукосушитель с сенсором Speedflow® Plus HEPA фильтр+ионизатор, сталь белый
Бренд:
![Mediclinics-PEGU](https://www.pegu.ee/media/gavial/.image/brand-thumb/general/Mediclinics/LOGO%20MEDICLINICS%20NEW%20sobre%20blanco.jpg)
Единица: шт
Время доставки: 14-21 день
Обязательно указать в спецификации проекта : PEGU OÜ
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
Видео
Дозатор для бумажных полотенец Mediclinics DT2106C Н/Р сталь, полированый
Korpuse paksus 0,8 mm
Roostevaba teras AISI 304, poleeritud
kaal 1,8 kg
Rätikud max 260x100mm
C/Z volditud rätikute mahutavas 400-600 tk
Seinale kinnituv käsiföön,
valge
ABS
Toitelüliti ja polüpropüleenist suunaotsakuga föön
Toeküljes pistikuga juhe, 650-1800mm
ABS seinatugi
kiirusevalits (kaks asendit)
Termokaitselülitiga mootor
Pinge 220V-240V
Sagedus 50/60 Hz
Elektroisaolatsioonini klass 2
Voolutarve 0,9-7A
Kaal 0,7 kg
Koguvõimsus 200-1800 W
Müratase 65dB
Föön automaatne
Kaks pardipistikut, 115 või 220V
Polükarbonaat
valge
Elemendil on termokaitselüliti
Lülitab käsiseadmete võtmesel hoidikust automaatselt sisse.
Valgest ABS termoplastist käsiseade.Termiliselt tegevdatud sisemus.
Pinge 220-240V
Sagedus 50/60 Hz
Elektroisolatsiooni klass 2
Õhutemperatuur (d=10cm ja toatemp 21C) 60 C
Paigalduskõrgus 1300-1500mm
Korpusepaksus 1,5mm
Voolutarve 2,6A-5,2A
Müüratase 68dB
Tegelik õhuvool 1080 l/min
Koguvõimsus 600-800-1100W
Mootori võimsus 60W
Toru pikkus 800-2000mm
p/min 4000-5000
Õhu liikumiskiirus 51 km/H
R/V teras AISI304 harjatud