Полка с крючками+Настенный крепёж для инвентаря Mop and Broom Holder Н/Р сталь AISI304
Бренд:
Единица: шт
Время доставки: 14-21 день
Обязательно указать в спецификации проекта : PEGU OÜ
DESCRIPTION
Файлы
MATERIALS: Mounting Base and Shelf — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. All-welded construction. Shelf is 8" (205mm) deep with 3/4" (19mm) return edge on all three sides. Front edge is hemmed for safety. Shelf Support Brackets — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish. Welded to mounting base and shelf. Mop/Broom Holders — Spring-loaded rubber cams with anti-slip coating. Plated steel retainers. Hooks — 18-8, type-304, 12-gauge (2.8mm) stainless steel with satin finish. Each hook attached to mounting strip with two rivets. OPERATION: Utility shelf with holders is designed to keep mops and brooms away from wall. Spring-loaded rubber cam holders accommodate handles from 7/8'' to 1-1/4'' (22 to 30mm) diameter. Utility shelf above handle area provides clear access to stored materials. INSTALLATION: Secure unit to wall with Phillips-head screws, furnished by manufacturer, at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
Overall dimension in mm Ø300 x 382 Inlet dimension in mm 1.5" Outlet dimension in mm 1.5" Material AISI 304 Material thickness in mm 1.5 Gross weight in kg 7.70
CANAL wall-mounted wash trough
Ref. 120300
Wall-mounted wash trough for 4 posts - 2,400mm
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets.
Easy to install: no joint concealers to install, light wash trough.
Drainage on the right.
With no tap hole.
Supplied with 1 ½" waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14296.
Weight: 20kg.
Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800007).
| Height | 250mm |
|---|---|
| Length | 2400mm |
| Width | 400mm |
| Thickness | 1mm (basin) et 1.5mm (edge and fixing brackets) |
| Finish | 304 polished satin stainless steel |
Valamu R/V terasest
Garaazi/koristusruumi jaoks
Intra настенная хозяйственная раковина VK 480x385x190mm, Н/Р сталь
Wall hung utility sink in stainless steel. Supplied with fixing brackets.
Tööstuslik veekraan
1" külmumiskindel kraan roostevabast terasest 3/4" väljundotsaga. Sobilik kasutamiseks põllumajanduses, pesukohtades, kalmistutel ja mujal.
Tarnitakse koos paigalduskaevuga.
Veekraan on varustatud isetühjeneva 3-suuna liugventiiliga kindlustamaks külmumiskindlust ka väga madala välistemperatuuri juures..
PAIGALDUS
Paigaldage veekraan 900 mm sügavusse kaevikusse ja ühendage veevõrguga kasutades 1" liitmikke.
Paigaldage 20-30 cm paksune killustikupadi nii külgedele kui ka kaevu põhja alla.
TEENINDAMINE
Veekraani tihendite vahetamine ja muu hooldus on võimalik ilma seda lahti kaevamata. Keerake lahti toru otsas olev kraani korpus ning tõmmake koos spindliga torust välja. Peale tihendite vahetust asetage koos spindliga tagas veekraani korpusesse.
VENTIILI TÖÖPÕHIMÕTE
Veekraani tööorganiks on 3-suuna isetühjenev liugventiil. Kui veekraani ei kasutata on nii ventiil kui ka jooksutorusse minev väljundtoru veest tühjad välistades sellega kümumisohu. Seega võib öelda, et kogu veekraan on samavõrd külmumiskindel kuivõrd seda on toitetrass.
1427,40 €
