Presto смеситель NEW TOUCH 6V CRP2 6 sek хром
> Working pressure :
1 to 5 bar
> Flow :
3l/min with integrated flow limiter High quality anti-limescale aerator Anti-water-hammering design
> Flow time :
6 seconds (Adjustable from 1 s to 5 min) and Start/Stop function Duration and frequency of the "duty flush" function adjustable
> Hydraulic supply :
G 3/8'' (12x17)
> Power supply :
Integrated 6V CRP2 lithium battery
> Material and colour finish :
Chrome-plated metal alloy components Injected molded metal body and cover
> Thermal resistance :
Resistant to a temperature of 75°C for 30-minute-thermal-shocks
> Security :
Temperature limiting system to avoid any risk of scalding Automatic shutdown of solenoid valve in case of power failure
> Delivered with :
2 PEX Hose Flexible with 3/8" Female Nut (12x17) and NF certified non return valve 2 strainer within a brass socket
2 Straight stop valves G 3/8" (12x17)
1 Fixing bracket
1 Flange gasket
1 Fastening nut Instruction manual
> Standards & approvals :
Molded chrome-plated body in accordance with EN 12540
200-hour neutral salt spray resistant (NSS) in accordance with ISO 9227
Файлы
Pissuaarikraan 1/2-1/2" 6 sek
Isesulguva mehhanismiga, kroom
> Working pressure: 1 to 5 bar
> Flow: 1.9 l/min with flow regulator Anti water-hammer system
> Flow time: 7 seconds - lever upwards 11 seconds - lever downwards
> Hydraulic supply: G 1/2'' x 40
> Thermal resistance: This tap can withstand a thermal shock of 75°C for 30 minutes as part of a thermal shock programme
> Safety: With S® antiblocking system to prevent blocking in continuous flow
> Convenience: Soft-touch Two-coloured ergonomic lever, in glass fiber reinforced polymer
> Delivered with: 1 Filter gasket 1 base gasket 1 fixture nut + 1 stainless steel washer 1 Nut for 12x14 tube 1 rubber flat gasket 1 coloured sticker
> Standards / Approvals: Chrome-plated brass body compliant with standards NF EN1982 / NF EN12164 / NF EN12165 Nickel-Chrome surface treatment compliant with NF EN12540 Neutral Salt Spray (NSS) resistant: 200 h according to NF ISO 9227
Complete assembling kit including pedal tap and spout
It includes: pedal tap art. 02061, spout art. 02024, water connections with flexibles, check valves with filter
Complete assembling kit including single pedal mixer and spout
It includes: single pedal mixer art. 02070, spout art. 02026, water connections with flexible tubes, check valves with filter
PREMIX COMFORT
Ref. 731004
Group thermostatic mixing valve for mixed water distribution from 32° to 42°C:
Anti-scalding safety.
Regulation of temperature variations.
Non-return valves and filters accessible from the exterior without having to remove the mechanism.
Thermal cartridge with no specific lever needed (push-button on the control knob).
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body.
Maximum hot water temperature: 85°C.
Differential hot water / mixed water: 15°C mini.
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended).
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended).
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring).
Mixed water outlet at the top (purple ring).
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom.
Maximum temperature limiter, can be adjusted by the installer.
Reduced risk of scalding by limiting temperature at the point-of-use.
140 lpm - M1 ¼".