• Manual centre feed paper towel dispenser, surface mounted, designed and manufactured by Mediclinics.

• Robust and vandal-resistant, these dispensers are designed to be installed in any type of public washroom with high traffic of people. Models for a more efficient use of the paper and suitable for different washroom environments: gymnasiums, sports centers, hospitals and health centers, restaurants and similar type of installations; solutions even for use in different places.

• All these models have a front sliding door, especially designed for an easy paper replacement. They have been designed to facilitate and optimize the rational use of the paper, such as for example the toothed paper outlet that facilitates the paper cutting.

• All Mediclinics paper tower dispensers are supplied with a lock and special key for opening and screws.

General Description

 Toilet paper dispenser for two standard rolls, surface mounted.  Suitable design for easy integration in the washroom and compatible with the line of washroom accessories Mediclinics®.

 Manual dispensing.

 One-piece body.  Suitable for high traffic facilities and for public use.  High strength, durability and anti vandalism model. Components & materials

 PR2784: steel, white Epoxy finish.

 PR2784C: stainless steel AISI 304, bright finish.

 PR2784CS: stainless steel AISI 304, satin finish.

 PR2784B: steel, black Epoxy finish.

 One-piece body, 0.8 mm thick with burr-free edges.

 One-piece lid, 0.8 mm thick, weld-free, fixed to the body by means of two rivets that allows swinging down of the lid for the replenishment.

 Back-plate 0.8 mm thick with slots for easy installation.

 Two slots in both sides that indicates the content level.

 Plastic holder for spare roll can be regulated in two different positions, depending on the size of the paper roll and allowing free movement of the roll in use. The toilet paper descends when the previous one has been finished by simply putting the hand through the side slot.

 Lock with standard Mediclinics® key

• White painted steel straight grab bars with Polypropylene snap flanges, suitable for people with reduced mobility, elderly people or the handicapped, especially designed to make their life a little bit easier.

• Can be installed in horizontal, vertical or slanting position.

• Models suitable for both, home and public use.

• 32 mm diameter bar for easier gripping.

• Provide confidence and stability.

• Concealed fixings thanks to their Polypropylene snap flanges.

• Optionally, they have a kit to avoid electrical conductivity (code KA0010).

• Supplied with stainless steel screws for concrete walls.

Mediclinics инвалидная ручка 390mm прямая чёрная сталь

• Black painted steel straight grab bars with Polypropylene snap flanges, suitable for people with reduced mobility, elderly people or the handicapped, especially designed to make their life a little bit easier.

• Can be installed in horizontal, vertical or slanting position.

• Models suitable for both, home and public use.

• 32 mm diameter bar for easier gripping.

• Provide confidence and stability.

• Concealed fixings thanks to their Polypropylene snap flanges.

• Optionally, they have a kit to avoid electrical conductivity (code KA0010).

• Supplied with stainless steel screws for concrete walls.

• Movable and sturdy hand sanitizing station holder for Mediclinics hand-sanitizer dispensers, made of steel, painted in white Epoxy and with a heavy and stable square base.

• Extremely robust and durable, this portable disinfection station holder is the perfect alternative for hand disinfection, in places where soap and water are not available.

• Compatible with the Mediclinics dispensers DJ0037A ..., DJF0038A ..., DJS0039A…, DJ0160AS, DJP0034…, DJFP035… y DJSP036 ....

• Ideal for use in high-traffic locations, such as airports, hospitals, shopping malls, schools, hotels and restaurants, museums, libraries, etc.

• The highly visible signage explains how to disinfect your hands correctly, reducing the spread of germs.

• Mediclinics' portable hand sanitizing station helps to keep a workplace more hygienic, cleaner and healthier. Suitable for any environment.

• Includes 4 screws, 4 nuts and 1 Hex key for the hand-sanitizer dispenser installation. No extra tooling is needed to install the hand-sanitizer dispenser.

• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.

• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.

• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.

• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.

• Adjustable power motor to regulate power consumption between 180 and 850 W.

• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).

• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.

• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.

• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.

• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.

• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.

• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.

• Adjustable power motor to regulate power consumption between 180 and 850 W.

• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).

• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.

• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.

• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.

• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.

• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.

• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.

• Adjustable power motor to regulate power consumption between 180 and 850 W.

• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).

• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.

• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.

• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.

• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.

• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.

• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.

• Adjustable power motor to regulate power consumption between 180 and 850 W.

• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).

• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.

• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.

• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

*сталь 0,8 mm 

*белая эпоксидная краска

*В комплекте крепление на стену

Prügikast 6L, seinapealne paigaldus

teras valge

Teras valge epoksükate , max rull d275mm

Teras valge epoksükate , max rull d275mm

Teras valge epoksükate , max rull d230mm

teras valge epoksükate , max rull d230mm

Дозатор для бумажных полотенец MEDICLINICS DT2106 сталь, белый

Korpuse paksus 0,8 mm

teras, epoksükate

kaal 1,8 kg

Rätikud max 260x100mm

C/Z volditud rätikute mahutavas 400-600 tk

Teras, valge epoksükate

Korpuse paksus 0,8 mm

kaal 1,8 kg

Rätikud max 260x100mm

C/Z volditud rätikute mahutavas 400-600 tk

Дозатор для дезенфектанта спрей Mediclinics сенсорный 1000ml Н/Р сталь белый

Desoaine spray dosaator Mediclinics sensoriga kontaktivaba 1000ml R/V teras valge

Seebidosaator valge/suitsukava 

ABS termoplastist klaas

1,1L

Seebidosaator

valge epoksükate,

R/V teras AISI 304

1,5L

Vandaalikindel lukuga korpus