Аксессуары для ваных комнат и элементы дизайна Mediclinics матовая нержавеющая сталь
Аксессуары и элементы декора ванной комнаты: Продукция из матовой нержавеющей стали от Mediclinics
Ванная комната - одно из самых важных помещений в каждом доме, служащее как местом отдыха, так и повседневных процедур. Mediclinics предлагает аксессуары и декор для ванной комнаты, объединяющие в себе качество, стиль и функциональность. Их сушилки для рук и инвалидные поручни из полированной нержавеющей стали - отличные примеры их стремления предоставить передовые решения.
Сушилки для рук из полированной нержавеющей стали Mediclinics: Вытирание рук - важная часть гигиенических процедур, и сушилки для рук от Mediclinics обеспечивают быстрое и эффективное выполнение этой задачи. Эти сушилки не только функциональны, но и обладают элегантным внешним видом благодаря корпусу из полированной нержавеющей стали. Качественная нержавеющая сталь обеспечивает стойкость к влаге и коррозии, делая их идеальным выбором как для дома, так и для общественных мест.
Инвалидные поручни из полированной нержавеющей стали Mediclinics: Безопасность в ванной комнате имеет первостепенное значение, особенно для тех, кто нуждается в дополнительной поддержке при движении. Инвалидные поручни из полированной нержавеющей стали Mediclinics разработаны с учетом как функциональности, так и эстетики. Они предоставляют надежную поддержку, а их долговечность и устойчивость к влаге обеспечивают длительное использование. Инвалидные поручни - это простой и практичный способ сделать ванную комнату более безопасной и удобной.
Цельный опыт ванной комнаты: Аксессуары и декор для ванной комнаты Mediclinics созданы для улучшения вашего повседневного использования ванной комнаты. Сушилки для рук из полированной нержавеющей стали и инвалидные поручни не только добавляют функциональности, но и придают визуальную элегантность. Эти продукты позволяют создать цельный опыт ванной комнаты, где сбалансированы практичность и дизайн.
Инвестиции в качество: Mediclinics известен своими продуктами высокого качества, и их аксессуары для ванной из полированной нержавеющей стали подтверждают это. Это инвестиции в комфорт и безопасность вашей ванной комнаты, а также стильный элемент дизайна.
Объедините стиль, безопасность и функциональность с сушилками для рук и инвалидными поручнями Mediclinics из полированной нержавеющей стали и создайте приятное и безопасное пространство в вашей ванной комнате. Ознакомьтесь с широким выбором продукции Mediclinics в интернет-магазине PEGU и найдите подходящие решения для вашей ванной комнаты.
General description ·Shelf, stainless steel AISI 304, satin finish, for mounting on the wall. ·Suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms. ·Model suitable for public use. ·With no removable components.
• Surface mounted spare toilet roll holder, made of AISI 304 stainless steel, with concealed fixings, satin finish.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• The slim and elegant shape creates a perfectly understated way to organize the bathroom life.
• Model suitable for the hotel sector, elderly centers, homes and for collectivities.
• Screws and plugs for installation to the wall are provided.
• Surface mounted dual roll toilet tissue dispenser with cover, satin finish, made of AISI 304 stainless steel.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Housing made of AISI 304 stainless steel, 0.8 mm thick. Drawn, one-piece, seamless construction.
• Covers made of AISI 304 stainless steel, 1.2 mm thick.
• Chrome-plated plastic spindles hold rolls up to130mm diameter, made of chrome-plated plastic and equipped with an inner heavy-duty spring.
• Model suitable for the hotel sector and for collectivities.
• Screws and plugs for installation to the wall are provided.
• Recessed mounted dual roll toilet tissue dispenser with cover, satin finish, made of AISI 304 stainless steel.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Housing made of AISI 304 stainless steel, 0.8 mm thick. Drawn, one-piece, seamless construction.
• Covers made of AISI 304 stainless steel, 1.2 mm thick.
• Chrome-plated plastic spindles hold rolls up to130mm diameter, made of chrome-plated plastic and equipped with an inner heavy-duty spring.
• Model suitable for the hotel sector and for collectivities.
• Screws and plugs for installation to the wall are provided.
• Surface mounted toilet tissue dispenser with hood, satin finish, made of AISI 304 stainless steel .
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• White plastic spindle holds rolls up to130 mm diameter and it is equipped with an inner heavy-duty spring.
• Model suitable for the hotel sector, elderly centers, homes and for collectivities.
• Screws and plugs for installation to the wall are provided.
• Surface mounted single roll toilet tissue dispenser, satin finish, made of AISI 304 stainless steel .
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Chrome-plated plastic spindle holds rolls up to130mm diameter.
• Model suitable for the hotel sector, elderly centers, homes and for collectivities.
• Screws and plugs for installation to the wall are provided.
STAINLESS STEEL TOILET ROLL HOLDER
Surface mounted single roll toilet tissue dispenser with cover, made of AISI 304 stainless steel, satin finish
• Surface mounted single roll toilet tissue dispenser with cover, satin finish, made of AISI 304 stainless steel.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Housing made of AISI 304 stainless steel, 0.8 mm thick. Drawn, one-piece, seamless construction.
• Cover made of AISI 304 stainless steel, 1.2 mm thick.
• Chrome-plated plastic spindle holds rolls up to130mm diameter, made of chrome-plated plastic and equipped with an inner heavy-duty spring.
• Model suitable for the hotel sector and for collectivities.
• Screws and plugs for installation to the wall are provided.
• Recessed mounted toilet tissue dispenser with cover, satin finish, made of AISI 304 stainless steel.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Housing made of AISI 304 stainless steel, 0.8 mm thick. Drawn, one-piece, seamless construction.
• Cover made of AISI 304 stainless steel, 1.2 mm thick.
• Chrome-plated plastic spindle holds rolls up to130mm diameter, made of chrome-plated plastic and equipped with an inner heavy-duty spring.
• Model suitable for the hotel sector and for collectivities.
• Screws and plugs for installation to the wall are provided.
• Trapezoidal towel ring, satin finish and made of AISI 304 stainless steel , for wall mounting.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Model suitable for the hotel sector and for collectivities.
• Concealed screws design.
• Screws and plugs for installation to the wall are provided.
STAINLESS STEEL SOAP DISH
Soap dish made of AISI 304 stainless steel, satin finish
• Washroom shelf made of AISI 304 stainless steel, satin finish, for wall mounting.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Model suitable for the hotel sector and for collectivities.
• Shelf made of AISI 304 solid stainless steel plate, 0.8 mm thick with roll-formed edges.
• Flange and posts made of AISI 304 stainless steel, 0.8 mm thick.
• Towel bar composed by one-piece curved AISI 304 stainless steel tube, diameter 6 mm, 0.8 mm thick.
• Concealed screws design.
• Screws and plugs for installation to the wall are provided.
• Holder for toilet paper roll, AISI 304 stainless steel, satin finish, for wall mounting.
• The stainless steel AISI 304 construction protects the product against rust and ensures quality and longevity.
• Model suitable for the hotel sector and for collectivities.
• Wall bracket made of AISI 304 stainless steel, 0.8 mm thick, bright finish.
• AISI 304 Stainless steel cylindrical axis for the roll, Ø 13.8mm.
• With no removable components.
• Mounting on the wall by means of one screw and one plastic plug (provided).
• It normally goes along with a stainless steel tower ring or rail.
• Double towel rail made of AISI 304 stainless steel with bars diameter 8mm and 0.8mm thick, satin finish, for mounting on the wall.
• Stainless steel AISI 304 arms, diameter 18mm and 0.8mm thick, satin finish.
• With smooth clean lines to suit modern bathrooms, this double towel rail is suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms.
• Stainless steel construction ensures durability and rust proof.
• With no removable components.
• It normally goes along with a stainless steel soap dispenser and a hand dryer.
• Screws and plugs for installation to a brick wall are provided.
• Towel rail made of AISI 304 stainless steel, diameter 9.8 mm bar, satin finish, for wall mounting.
• Stainless steel AISI 304 arms, 0.8 mm thick, satin finish.
• With smooth clean lines to suit modern bathrooms, this towel rail is suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms.
• Stainless steel construction ensures durability and rust proof.
• With no removable components.
• It normally goes along with a stainless steel soap dispenser and a hand dryer.
• Means by brick wall mounting are supplied.
• Toilet roll holder with cover made of AISI 304 stainless steel satin finish, for wall mounting.
• Made from premium quality stainless steel, which resists rust and corrosion, ensuring good strength and durability.
• Suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms and for public use.
• Two supports to the wall made of AISI 304 stainless steel, 0.8 mm thick, guaranties a correct toilet roll holder fixation.
• Toilet roll holder cover is also made of AISI 304 stainless steel, 0.8 mm thick.
• Cylindrical roll shaft is made of AISI 304 stainless steel, diameter 9.8mm.
• With no removable components.
• It normally goes along with a stainless steel towel ring or rail.
• Screws and plugs for installation to a brick wall are supplied.
• Manual centre feed paper towel dispenser, surface mounted, designed and manufactured by Mediclinics.
• Robust and vandal-resistant, these dispensers are designed to be installed in any type of public washroom with high traffic of people. Models for a more efficient use of the paper and suitable for different washroom environments: gymnasiums, sports centers, hospitals and health centers, restaurants and similar type of installations; solutions even for use in different places.
• All these models have a front sliding door, especially designed for an easy paper replacement. They have been designed to facilitate and optimize the rational use of the paper, such as for example the toothed paper outlet that facilitates the paper cutting.
• All Mediclinics paper tower dispensers are supplied with a lock and special key for opening and screws.
Technical specifications
Dimensions 261x376x261mm
Paper roll capacity MAX d270mm
Paper height Max 270mm
Thickness of metal components 0.8mm
Weight (empty) 3.1
material:AISI 304 stainless steel | finish:Satin
90º angled grab bar
Solutions with several ergonomics and functionalities and with the possibility of having different materials and finishes. Mediclinics offers professionals a wide range of grab bars for toilets to help persons with reduced mobility use the facilities. Within this range, two product lines are available:
Medinox Series
State of the art design, high durability and easy to maintain. The process used for bending the grab bars guarantees uniformity in the diameter of its curves. Built using AISI 304 stainless steel with a bright and satin finish.
Mediepoxy Series
Solutions manufactured with a corrosion resistant treatment, ideal for very harsh environments, with a low need for maintenance and long durability. The grab bars for toilets are made of steel with an epoxy finish.
Mediclinics grab bars for toilets include a snap flange cover for installation out of sight, offering a perfect visual finish and allowing to be easily blended in with the decoration of the room.
Apart from the grab bars for toilet, Mediclinics provides shower seats made of AISI 304 stainless steel, which are robust, safe and suitable for installation in harsh environments.
• Straight grab bar with snap flange made of AISI 304 stainless steel, for horizontal, vertical or slanting installation.
• Suitable for specific bathrooms for people with mobility problems, elderly people or the handicapped. Model suitable for both home and public use.
• This safety bar provides an easily accessible grip all around.
• Highest durability and rusting resistance.
• Optionally, they have a kit to avoid electrical conductivity (code KA0020).
• Stainless steel nuts and volts for masonry walls included.
General description
L454 x L869 mm
-
Grab bar, 90o angle to the right (BAD090C & BAD090CS) or to the left (BAI090C & BAI090CS) with snap flange cover, made of stainless steel AISI 304, for showers, baths and changing rooms.
-
These grab bars are very useful and highly recommended to achieve barrier-free accessibility both residential and public spaces.
-
Concealed screw mounting flanges.
-
Highest durability and rusting resistance.
-
Mounting hardware for brick wall is included for easy installation.
Components and materials
-
BAD090C & BAI090C: AISI 304 stainless steel, bright finish.
-
BAD090CS & BAI090CS: AISI 304 stainless steel, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along
the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes
for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 1.5 mm thick and Ø 82 mm. Each cover snaps over mounting
flange to conceal mounting screws.
General description
-
Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
-
With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
-
These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced
mobility. Models suitable for public use.
-
Well suited for keeping bathrooms and public enclosures barrier-free.
-
Highest durability and great resistance to rusting.
-
Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
-
Supplied with plugs and screws to fix the bar to a brick wall.
Components and materials
-
BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
-
SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
-
General description
-
Wall-floor grab bar, with three support points, made of a diameter of 32 mm AISI 304 stainless steel tube, bent in an "L" shape at 90o and with a 32mm diameter lateral arm, welded on the lower part of the grab bar and also bent at 90°.
-
With snap flange covers that conceal the installation screws, improving the aesthetics of the bars once installed on the wall.
-
These grab bars offer a great safety and comfort to the user, helping to make the bathroom much safer for the elderly or those with reduced
mobility. Models suitable for public use.
-
Well suited for keeping bathrooms and public enclosures barrier-free.
-
Highest durability and great resistance to rusting.
-
Optionally, these grab bars can be electrically isolated, installing the electrical isolation kit code KA0020.
-
Supplied with plugs and screws to fix the bar to a brick wall.
Components and materials
-
BSD020C: right hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSI020C: left hand grab bar made of AISI 304 stainless steel tube, bright finish.
-
BSD020CS: right hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
BSI020CS: left hand grab bar made of AISI 304 stainless steel tube, satin finish.
-
TUBING: made of a 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screw holes for wall mounting.
-
SNAP FLANGE COVER: three units made of AISI 304 stainless steel, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
-
Technical specifications
Dimensions 825 x 807 x 100 mm
Bar and leg diameter Wall plate thickness Ø 32 mm 3,0 mm
Paper roll dispenser diameter Ø 10 mm
-
Components y materials
-
FOLDING BAR: folded in a trapezoidal shape and manufactured with a 32 mm diameter AISI 304 stainless steel tube satin finish. Both bar ends are welded to the vertical column, made of a 32 mm diameter stainless steel AISI 304 tube. The grip zones of the bar have a safety anti-slip finish to improve the user safety. It incorporates a paper roll holder 120 mm length, made of a 6 mm diameter AISI 304 stainless steel rod.
-
WALL MOUNTING PLATE: made of an AISI 304 stainless steel satin finish rectangular plate of 125 x 100 mm and 10 mm thick. It incorporates four Ø 8 mm countersunk holes, to fix the bar to the wall.
-
FLOOR MOUNTING PLATE: made of an AISI 304 stainless steel satin finish circular plate of Ø 75 mm and 5 mm thick. It incorporates three Ø 7 mm countersunk holes to fix the bar on the floor.
-
UNLOCK HANDLE: made of black thermoplastic.
BG0089CS Satin finish
Technical specifications
Dimensions
Grab bar and column diameter Wall mounting plate thickness Floor mounting plate thickness Paper roll holder diameter
700 x 835 x 100 mm
Ø 32 mm 10.0 mm 5.0 mmØ 6.0 mm
General description
-
Wall to wall grab bar with three support points, made of diameter 32 mm AISI 304 stainless steel tube, to be installed in the washbasins and toilets.
-
With snap flange covers to conceal the screws, helping to achieve a beautiful and sleek look and protecting the flange surfaces from damage, dust, moisture and foreign particles.
-
Ideal to design barrier-free accessibility, both domestic and commercial places, these grab bars help make the lives easier for the handicapped and elderly people.
-
Highest durability and rusting resistance.
-
Optionally, these bars can be electrically isolated by installing the electrical isolation Kit code KA0020.
-
These grab bars are supplied with a kit to fix the bar to a brick wall.
Components and materials
-
BFD600C: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFI600C: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFD600CS: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
BFI600CS: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
• Square towel ring made of AISI 304 stainless steel satin finish, 0.8 mm thick, for wall mounting.
• Long lasting life thanks to the quality of its AISI 304 stainless steel construction.
• Suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms and for public use.
• With no removable components.
• It normally goes along with a stainless steel soap dispenser.
• Screws and plastic plugs for brick walls are provided.
• Round towel ring, satin finish and made of AISI 304 stainless steel, for wall mounting.
• The AISI 304 stainless steel construction protects the product against rust and ensures quality and longevity.
• Model suitable for the hotel sector and for collectivities.
• Concealed screws design.
• With no removable components.
• Screws and plugs for installation on a brick wall are provided.
• Soap dish for wall mounting, made of AISI 304 stainless steel satin finish.
• This soap dish consists in a holder + a dish, both made of AISI 304 stainless steel, 0.8 mm thick.
• With smooth clean lines to suit modern bathrooms, this soap dish is suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms.
• Stainless steel construction ensures durability and rust proof.
• With no removable components.
• It normally goes along with a stainless steel towel rail or towel ring.
• Mounting on the wall by means of two supplied screws.
General description
-
Wall to wall grab bar with three support points, made of diameter 32 mm AISI 304 stainless steel tube, to be installed in the washbasins and toilets.
-
With snap flange covers to conceal the screws, helping to achieve a beautiful and sleek look and protecting the flange surfaces from damage, dust, moisture and foreign particles.
-
Ideal to design barrier-free accessibility, both domestic and commercial places, these grab bars help make the lives easier for the handicapped and elderly people.
-
Highest durability and rusting resistance.
-
Optionally, these bars can be electrically isolated by installing the electrical isolation Kit code KA0020.
-
These grab bars are supplied with a kit to fix the bar to a brick wall.
Components and materials
-
BFD600C: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFI600C: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, bright finish.
-
BFD600CS: grab bar right hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
BFI600CS: grab bar left hand, made of diameter 32 mm AISI 304 stainless steel tube, satin finish.
-
TUBING: made of 32 mm diameter tube, seamless construction. The bending process guarantees the uniformity of the diameter along the bends.
-
CONCEALED MOUNTING FLANGE: three units made of AISI 304 stainless steel, 3 mm thick. Incorporates two Ø 6.5 mm screws holes for wall mounting.
-
SNAP FLANGE COVER: three units made of stainless steel AISI 304, 0.8 mm thick and Ø 82 mm. Each cover snaps over mounting flange to conceal mounting screws.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
• The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom.
• The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc.
• Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market.
• Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.
• Adjustable power motor to regulate power consumption between 180 and 850 W.
• It incorporates as standard a HEPA filter medium that filters solid particles in suspension and can optionally incorporate an ionizer ("Ion Hygenic") that purifies the air through negatively charged particles (anions).
• Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.
• Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.
• Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.
