Group thermostatic mixing valve for mixed water distribution from 32° to 42°C: 
Anti-scalding safety. 
Regulation of temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism. 
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring). 
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
140 lpm - M1 ¼".

Group thermostatic mixing valve for mixed water distribution from 32° - 42°C: 
Anti-scalding safety. 
Regulates temperature variations. 
Filters and non-return valves can be accessed from the outside without removing the mechanism. 
Thermal shock with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C minimum. 
Pressure difference at the inlets: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 - 10 bar (1 - 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring). 
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
55 lpm - M3/4".

Group thermostatic mixing valve for mixed water distribution from 32° to 42°C: 
Anti-scalding safety. 
Regulation of temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism. 
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring). 
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
190 lpm - M1 1/2".

Group thermostatic mixing valve for hot water circulating loops adjustable from 44°C to 58°C: 
Anti-scalding safety. 
Regulates temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism.
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with thermostatic cell. 
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring) for bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
15% energy savings: optimised heat loss (comparison between a circulating loop at 55°C and a non-circulating system at 70°C). 
Safety and prolongation of system life span (Hot water at >65°C leads to premature aging within the system). 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
190 lpm - M1 1/2".

Group thermostatic mixing valve for mixed water distribution from 32° to 42°C: 
Anti-scalding safety. 
Regulation of temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism. 
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring). 
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
140 lpm - M1 1/4".

Group thermostatic mixing valve for hot water circulating loops adjustable from 44°C to 58°C: 
Anti-scalding safety. 
Regulates temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism.
Thermal shocks are possible. 
Interchangeable cartridge with automotive cell. 
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C minimum. 
Pressure differences at the inlets: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring) for bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
15% energy savings: optimised heat loss (comparison between a circulating loop at 55°C and a non-circulating system at 70°C). 
Safety and prolongation of system life span (Hot water at >65°C leads to premature aging within the system). 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
140 lpm - M1 1/4 ".

Group thermostatic mixing valve for mixed water distribution from 32° - 42°C: 
Anti-scalding safety. 
Regulates temperature variations. 
Filters and non-return valves can be accessed from the outside without removing the mechanism. 
Thermal shock with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C minimum. 
Pressure difference at the inlets: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 - 10 bar (1 - 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring). 
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
90 lpm - M1".

Group thermostatic mixing valve for hot water circulating loops adjustable from 44°C to 58°C: 
Anti-scalding safety. 
Regulates temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism.
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with thermostatic cell. 
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring) for bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
15% energy savings: optimised heat loss (comparison between a circulating loop at 55°C and a non-circulating system at 70°C). 
Safety and prolongation of system life span (Hot water at >65°C leads to premature aging within the system). 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
90 lpm - M1".

Group thermostatic mixing valve for hot water circulating loops adjustable from 44°C to 58°C: 
Anti-scalding safety. 
Regulates temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism. 
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with thermostatic cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring) for bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
15% energy savings: optimised heat loss (comparison between a circulating loop at 55°C and a non-circulating system at 70°C). 
Safety and prolongation of system life span (Hot water at > 65°C leads to premature aging within the system).
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
55 lpm - M3/4". 

Group thermostatic mixing valve for mixed water distribution from 32° to 42°C: 
Anti-scalding safety. 
Regulation of temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism. 
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring). 
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
190 lpm - M1 1/2".

Group thermostatic mixing valve for mixed water distribution from 32° to 42°C: 
Anti-scalding safety. 
Regulation of temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism. 
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring). 
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
90 lpm - M1".

Group thermostatic mixing valve for mixed water distribution from 32° to 42°C: 
Anti-scalding safety. 
Regulation of temperature variations. 
Non-return valves and filters accessible from the exterior without having to remove the mechanism. 
Thermal cartridge with no specific lever needed (push-button on the control knob). 
Interchangeable cartridge with automotive cell.
High-resistance chrome-plated brass body. 
Maximum hot water temperature: 85°C. 
Differential hot water / mixed water: 15°C mini. 
Pressure differences at the entrance: 1 bar maximum (0.5 bar recommended). 
Minimum pressure / maximum: 1 to 10 bar (1 to 5 bar recommended). 
Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). 
Mixed water outlet at the top (purple ring). 
For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. 
Maximum temperature limiter, can be adjusted by the installer. 
Reduced risk of scalding by limiting temperature at the point-of-use. 
55 lpm - M 3/4".

PREMIX COMPACT thermostatic mixing valve for mixed water distribution from 30 - 60°C: 
For 2 to 7 sanitary points-of-use (depending on the flow rate). 
Anti-scalding safety: immediate shut-off if cold or hot water supply fails. 
Adjustable temperature from 30 - 60°C, can be blocked by the installer. 
Brass body.
Filters and non-return valves. 
Minimum flow rate to operate: 5 lpm. 
Thermal shocks are possible. 
M1/2". 
Nickel-plated brass with blue control cap.

PREMIX COMPACT thermostatic mixing valve for mixed water distribution from 30 - 60°C: 
For 2 to 10 sanitary points-of-use (depending on the flow rate). 
Anti-scalding safety: immediate shut-off if cold or hot water supply fails. 
Adjustable temperature from 30 - 60°C, can be blocked by the installer. 
Brass body.
Filters and non-return valves. 
Minimum flow rate to operate: 5 lpm. 
Thermal shocks are possible. 
M3/4". 
Nickel-plated brass with blue control cap.

PREMIX COMPACT thermostatic mixing valve for mixed water distribution from 30 - 60°C: 
For 2 to 7 sanitary points-of-use (depending on the flow rate). 
Anti-scalding safety: immediate shut-off if cold or hot water supply fails. 
Adjustable temperature from 30 - 60°C, can be blocked by the installer. 
Brass body.
Filters and non-return valves. 
Minimum flow rate to operate: 5 lpm. 
Thermal shocks are possible. 
M1/2". 
Chrome-plated brass with blue control cap.

PREMIX COMPACT thermostatic mixing valve for mixed water distribution from 30 - 60°C: 
For 2 to 10 sanitary points-of-use (depending on the flow rate). 
Anti-scalding safety: immediate shut-off if cold or hot water supply fails. 
Adjustable temperature from 30 - 60°C, can be blocked by the installer. 
Brass body.
Filters and non-return valves. 
Minimum flow rate to operate: 5 lpm. 
Thermal shocks are possible. 
M3/4". 
Chrome-plated brass with blue control cap.

Hot water thermostatic mixing valve for mixed water distribution from 34 - 60°C:
For 1 - 2 taps or 1 shower.
Anti-scalding safety: immediate shut-off if cold or hot water fails.
Temperature pre-set at 38°C, can be adjusted by the installer from 34 - 60°C.
Brass body.
Filters and non-return valves.
Minimum flow rate to operate: 3 lpm.
Thermal shocks are possible.
Nickel-plated brass body M1/2'' inlets and Ø 15mm conical outlets. 

Hot water thermostatic mixing valve for mixed water distribution from 34 - 60°C:
For 1 - 2 taps or 1 shower.
Anti-scalding safety: immediate shut-off if cold or hot water fails.
Temperature pre-set at 38°C, can be adjusted by the installer from 34 - 60°C.
Brass body.
Filters and non-return valves.
Minimum flow rate to operate: 3 lpm.
Thermal shocks are possible.
Chrome-plated brass body M1/2'' inlets and Ø 15mm conical outlets. 

Hot water thermostatic mixing valve for mixed water distribution from 34 - 60°C:
For 1 to 2 taps or 1 shower.
Anti-scalding safety: automatic water shut-off in case of hot or cold water supply failure.
Temperature pre-set at 38°C, can be adjusted by the installer from 34 - 60°C.
Non-return valves and filters.
Minimum flow rate for operation: 3 lpm.
Thermal shocks are possible.
Nickel-plated body, inlets F3/8" and outlet M3/8".

Hot water thermostatic mixing valve for mixed water distribution from 34 - 60°C:
For 1 to 2 taps or 1 shower.
Anti-scalding safety: automatic water shut-off in case of hot or cold water supply failure.
Temperature pre-set at 38°C, can be adjusted by the installer from 34 - 60°C.
Non-return valves and filters.
Minimum flow rate for operation: 3 lpm.
Thermal shocks are possible.
Polished chrome body, hot water inlet F3/8", cold water inlet M3/8"and mixed water outlet M3/8".

Hot water thermostatic mixing valve for mixed water distribution from 34 - 60°C:
For 1 to 2 taps or 1 shower.
Anti-scalding safety: automatic water shut-off in case of hot or cold water supply failure.
Temperature pre-set at 38°C, can be adjusted by the installer from 34 - 60°C.
Non-return valves and filters.
Minimum flow rate for operation: 3 lpm.
Thermal shocks are possible.
Chrome-plated body, inlets F3/8" and outlet M3/8".

Cross wall electronic shower kit: 
TEMPOMATIC electronic valve for mixed water supply. 
For walls ≤ 155mm. 
Power supply by electronic unit with solenoid valve 1/2".
230/12V transformer. 
2 operation modes: 
- Automatic activation via presence detection. 
- Voluntary ON/OFF activation by passing the hand in front of sensor ~10 cm. 
Duty flush (~60 seconds every 24 hours after the last use). 
Adjustable time flow from 30 to 60 seconds. 
Flow rate set at 6 lpm at 3 bar. 
Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
Chrome-plated solid brass. 
Wall plate flush to the wall. 
Threaded rods can be cut-to-size.

Exposed time flow shower mixer:
TEMPOMIX 3 single control mixer, bottom outlet M3/4" with M1/2" connector.
Temperature control and operation via the push-button.
Maximum temperature limiter (can be adjusted by the installer).
For wall-mounted, exposed installation.
Soft-touch operation.
Time flow pre-set at ~30 seconds, can be adjusted from 20 - 30 seconds.
Flow rate 9 lpm at 3 bar, can be adjusted.
Chrome-plated solid brass.
Integrated filters and non-return valves.
Chrome-plated metal push-button.
M1/2" offset connectors for 130 - 170mm centres.

Exposed time flow shower kit:
TEMPOMIX 3 single control mixer ¾", top outlet.
For wall-mounted, exposed installation.
Temperature control and operation via the push-button.
Maximum temperature limiter (can be adjusted by the installer).
Soft-touch operation.
Time flow pre-set at ~30 seconds, can be adjusted from 20 - 30 seconds.
Flow rate 6 lpm at 3 bar.
Chrome-plated, tamperproof, scale-resistant TONIC JET shower head with automatic flow rate regulation.
Chrome-plated solid brass.
Integrated filters and non-return valves.
Chrome-plated metal push-button.
Shower column Ø 16mm with reinforced collar (fixing plate and screws included).
M1/2" offset connectors for 130 - 170mm centres.