Профессиональная сантехника Н/Р сталь AISI304
Wall-mounted cleaners' sink
Ref. 182400
Wall-mounted cleaners' sink with splashback.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 0.9mm.
Seam-free, pressed bowl.
Deep sink.
Smooth surface.
Rounded edges prevent injury.
Supplied with 1½" waste .
Without overflow.
Supplied with fixing elements and splashback.
Weight: 4.6kg.
TECHNICAL FEATURES
Wall-mounted cleaners' sink
Ref. 182400
| Height | 404mm |
|---|---|
| Length | 370mm |
| Width | 460mm |
| Thickness | 0.9mm |
| Finish | Polished satin 304 stainless steel |
MINIMAL corner washbasin
Ref. 121550
Wall-mounted corner washbasin (90° angle).
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm
Rounded edges prevent injury.
With Ø 35mm central tap hole.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 4kg.
Surgical scrub-up trough with high upstand
Ref. 186000
Wall-mounted surgical scrub-up trough with 450mm upstand.
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Length 1,400mm, 2 services. Without tap hole.
Smooth surface and rounded inside edges for easy cleaning.
"Hygiene+" design: reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow.
Supplied with fixing elements.Weight: 34.4kg.
Surgical scrub-up trough with low upstand
Ref. 186020
Wall-mounted surgical scrub-up trough with 75mm upstand.
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Length 1,400mm, 2 services. Without tap hole.
Smooth surface and rounded inside edges for easy cleaning.
"Hygiene+": reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. Supplied with fixing elements.
Weight: 26.6kg.
Surgical scrub-up trough with high upstand
Ref. 187000
Wall-mounted surgical scrub-up trough with 450mm upstand.
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Length 2,100mm, 3 services. Without tap hole.
Smooth surface and rounded inside edges for easy cleaning.
"Hygiene+" design: reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow.
Supplied with fixing elements.Weight: 48.5kg.
Surgical scrub-up trough with low upstand
Ref. 187020
Wall-mounted surgical scrub-up trough with 75mm upstand.
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Length 2,100mm, 3 services. Without tap hole.
Smooth surface and rounded inside edges for easy cleaning.
"Hygiene+": reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. Supplied with fixing elements.
Weight: 37.6kg.
Surgical scrub-up trough with high upstand
Ref. 185000
Wall-mounted surgical scrub-up trough with 450mm upstand.
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Length 700mm, 1 service. Without tap hole.
Smooth surface and rounded inside edges for easy cleaning.
"Hygiene+" design: reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow.
Supplied with fixing elements.Weight: 20.3kg.
Surgical scrub-up trough with low upstand
Ref. 185020
Wall-mounted surgical scrub-up trough with 75mm upstand.
Suitable for hospitals and healthcare facilities.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Length 700mm, 1 service. Without tap hole.
Smooth surface for easy cleaning.
"Hygiene+": reduces niches where bacteria can develop, concealed trap, easy to clean.
Drainage on the right. Without overflow. Supplied with fixing elements.
Weight: 15.6kg.
Wall-mounted plaster sink
Ref. 180130
Wall-mounted plaster sink.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm.
Smooth surface and flat edges for easy cleaning.
Suitable for hospitals, healthcare establishments and leisure centres.
Supplied with removable plaster basket with lid to filter plaster debris.
Can be installed in 2 ways: bowl on the right or bowl on the left.
Waste outlet 1 ½".
Supplied with fixing elements.Weight: 17kg.
TECHNICAL FEATURES
Wall-mounted plaster sink
Ref. 180130
| Height | 390mm |
|---|---|
| Length | 600mm |
| Width | 1000mm |
| Thickness | 1.5mm |
| Finish | 304 polished satin stainless steel |
FACIL wall-mounted washbasin
Ref. 121800
Wall-mounted washbasin, 360x390mm.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With Ø 35mm on the right.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 4.1kg.
REDO wall-mounted washbasin
Ref. 121710
Wall-mounted washbasin.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With central tap hole Ø 35mm.
Supplied with 1 ¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 3kg.
TECHNICAL FEATURES
REDO wall-mounted washbasin
Ref. 121710
| Height | 150mm |
|---|---|
| Length | 375mm |
| Width | 430mm |
| Thickness | 1.2mm |
| Finish | 304 polished satin stainless steel |
Floor-standing SXL hand washbasin
Ref. 180300
Floor-standing, foot-operated hand washbasin.
Can be wall-mounted and/or floor-standing.
Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
Supplied with swan neck spout and time flow tap with 7 second time flow.
Easy to maintain: access panel at the front.
Supplied with 1¼" waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 10kg.
Wall-mounted SXS electronic hand washbasin WRAS
Ref. 18431015
Wall-mounted hand washbasin with electronic control.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Without splashback.
Supplied with WRAS approved electronic tap with integrated battery and solenoid valve, a TMV3 and WRAS approved thermostatic mixing valve and a chrome-plated brass soap-dispenser.
1¼" waste included. Without overflow.
Water savings: flow rate pre-set at 3 lpm.
Maximum hygiene: no manual contact with tap, reduced stagnation solenoid valve, duty flush prevents bacterial development.
Supplied with fixings.
CE marked. Complies with European standard EN 14688.
Weight: 4.1kg.
Wall-mounted SXS electronic hand washbasin
Ref. 184310
Wall-mounted hand washbasin with electronic control.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Without splashback.
Supplied with battery-operated electronic mixer with integrated battery and solenoid valve, and chrome-plated brass soap-dispenser.
1¼" waste included. Without overflow.
Water savings: flow rate pre-set at 3 lpm.
Maximum hygiene: no manual contact with tap, reduced stagnation solenoid valve, duty flush prevents bacterial development.
Supplied with fixings.
CE marked. Complies with European standard EN 14688.
Weight: 4.1kg.
Floor-standing XL P disposal sink
Ref. 182070
Floor-standing disposal sink.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm.
Smooth surface is easy to clean.
Concealed perimetral flushing system.
Horizontal or vertical water inlet: Ø 55mm.
Horizontal or vertical water outlet: Ø 100mm.
Supplied with PVC pipe.
Concealed drainage: shrouded sink.
Quick and easy to install: 2 access panels
with theft prevention TORX security screws.
Hinged stainless steel bucket grid.
Weight: 16kg.
TECHNICAL FEATURES
Floor-standing XL P disposal sink
Ref. 182070
| Height | 450mm |
|---|---|
| Length | 445mm |
| Width | 410mm |
| Thickness | 1.5mm |
| Finish | 304 polished satin stainless steel |
Floor-standing XL P disposal sink
Ref. 182060
Floor-standing disposal sink.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.5mm.
Polished satin finish.
Smooth surface is easy to clean.
Concealed perimetral flushing system.
Horizontal or vertical water inlet: Ø 55mm.
Horizontal or vertical water outlet: Ø 100mm.
Supplied with PVC pipe.
Concealed drainage: shrouded sink.
Quick and easy to install: 2 access panelswith theft prevention TORX security screws.
Hinged stainless steel bucket grid.
Weight: 16kg.
TECHNICAL FEATURES
Floor-standing XL P disposal sink
Ref. 182060
| Height | 450mm |
|---|---|
| Length | 445mm |
| Width | 410mm |
| Thickness | 1.5mm |
| Finish | 304 polished satin stainless steel |
Wall-mounted XL S disposal sink
Ref. 182160
Wall-mounted disposal sink.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm
Smooth surface for easy cleaning.
Concealed perimetral flushing system.
Horizontal water inlet: Ø 55mm.
Recessed horizontal waste outlet: Ø 100mm.
Concealed drainage: shrouded sink.
Quick and easy to install from the front thanksto a stainless steel mounting frame.
Hinged stainless steel bucket grid.
Supplied with fixing elements.
Weight: 15kg.
TECHNICAL FEATURES
Wall-mounted XL S disposal sink
Ref. 182160
| Height | 410mm |
|---|---|
| Length | 500mm |
| Width | 410mm |
| Thickness | 1.5mm |
| Finish | 304 polished satin stainless steel |
Wall-mounted disposal sink
Ref. 180170
Wall-mounted disposal sink.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.5mm
Smooth surface for easy cleaning.
Waste outlet 1 ¼". Waste not included.
Hinged stainless steel bucket grid.
Without overflow.
Supplied with fixing elements.
Weight: 5.1kg.
TECHNICAL FEATURES
Wall-mounted disposal sink
Ref. 180170
| Height | 195mm |
|---|---|
| Length | 390mm |
| Width | 360mm |
| Thickness | 1.2mm |
| Finish | 304 polished satin stainless steel |
Delabie хозяйственная напольная раковина c видуаром Н/Р сталь AISI304
Floor-standing janitorial unit
Ref. 180140
Floor-standing janitorial unit.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.0mm.
Smooth surface for easy cleaning.
Adjustable feet height up to 25mm.
With tap hole Ø 35mm on right side.
Supplied with 1 ¼" waste for washbasin and 1½" for disposal sink. Without overflow.
Hinged stainless steel bucket grid.
Weight: 22kg.
TECHNICAL FEATURES
Floor-standing janitorial unit
Ref. 180140
| Height | 900mm |
|---|---|
| Length | 600mm |
| Width | 500mm |
| Thickness | 1.0mm |
| Finish | 304 polished satin stainless steel |
Floor-standing disposal sink
Ref. 180150
Floor-standing disposal sink.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.0mm.
One-piece pressed bowl, seam-free.
Smooth surface is easy to clean.
Adjustable feet height up to 40mm.
Supplied with 1½" waste. Without overflow.
Hinged stainless steel bucket grid.
Weight: 10.6kg.
TECHNICAL FEATURES
Floor-standing disposal sink
Ref. 180150
| Height | 475/495mm |
|---|---|
| Length | 480mm |
| Width | 480mm |
| Thickness | 1.0mm |
| Finish | 304 polished satin stainless steel |
Valamu R/V terasest
Garaazi/koristusruumi jaoks
Valamu R/V terasest
Garaazi/koristusruumi jaoks
Valamu R/V terasest
Garaazi/koristusruumi jaoks
Bucket sink in stainless steel for wall mounting. Supplied with stainless steel wall panel, supporting bracket and 3 1/2" x 2" waste with plug and overflow.
Intra U1STD компактная L375mm Н/Р сталь раковина, с задней стенкой
Valamu R/V terasest
Garaazi/koristusruumi jaoks
Intra UME Н/Р сталь раковина для уборщицы, с задней стенкой 435x320x205mm
Раковина из нержавеющей стали для уборщицы, гаража, производства
UME
Stainless Steel bucket sink. Supplied with splash back and fitted with a fixated swing back bucket tray. Including 1½” waste plug.
IIntra UXL Н/Р сталь раковина для уборщицы, с задней стенкой 560x460x185mm
Раковина из нержавеющей стали для уборщицы, гаража, производства
UXL
Stainless Steel bucket sink. Supplied with splash back and fitted with a removable swing back bucket tray. Including 1½” waste plug.
Intra настенная хозяйственная раковина VK 480x385x190mm, Н/Р сталь
Wall hung utility sink in stainless steel. Supplied with fixing brackets.
Intra настенная хозяйственная раковина VK 655x505x250mm, Н/Р сталь
Wall hung utility sink in stainless steel. Supplied with fixing brackets.
Ref: 70812 - Column – deck-mounted mixer – rinsing head
> THE PRODUCT BENEFITS
Resistant to intensive use
Spring flexibility
Ergonomic hand shower with continuous flow function, and gripping surface limiting the risk of burns. Tip to absorb shocks. Locking hook to avoid MSDs (musculoskeletal disorders)
Reinforced body / column interface
Intuitive and ergonomic knobs: easy grip
Product design
Adjustable wall support
PU sheath shower hose to avoid bacterial niches and facilitate cleaning
Easy maintenance: presence of a slot under the red / blue patch allowing the passage of a screwdriver
Ease of maintenance: availability of all spare parts
> TECHNICAL SPECIFICATIONS > Model:
1/4 turn ceramic head mixer
Black M 1/2 '' hand shower with grip surface limiting the risk of burns. Regulated flow 12L / min. User adjustable jet: concentrated or wetting. Anti-scale shower head. Locking hook for continuous flow. Integrated non-return valve.
Guide spring for stainless steel hose
Adjustable wall support, can be cut from 60 to 200 mm (from column to wall)
Adjustable hand shower holder: left or right
> Recommended working pressure:
1 to 5 bars
> Flow rate:
12L / min at 3 bar
> Hydraulic supply:
G 1/2 '' (15x 21)
> Material and color of finish:
Body and column in chromed brass Injected metal hook
Material compliant with the "UBA" list
> Thermal resistance :
Withstands a temperature of 75 ° C for 30 minutes (in the context of thermal shock).
> Delivered with:
1 fixing bracket
1 filter
2 PEX flexible hoses with stainless steel braided nut G1 / 2 '' Lg 660 mm with non-return valves NF
1 stainless steel braided hose (hand shower) surrounded by a PU sheath, resistant to temperatures up to 90 ° C. Continuous operating temperature at 70 ° C maximum
> Standards and approvals:
Chromed brass body compliant with standards NF EN1982 / NF EN 12164 / NF EN 12165 Nickel-Chrome surface treatment according to NF EN12540
Resistance to neutral salt spray (NSS): 200 h according to NF ISO 9227
